BERES MG613 DRIVER
3D
Clubhead from every angle available in 3-D.
Trajectory image
Trajectory image is available in FLASH Animation.
Data based on Robot Test set at head speed of 36m/s
See head features in film
Diagram of head can be observe in wire frame.
Visually check the characteristic of product.
A bold shallow-back design
The ball looks comfortably the same as always at address, only this time we’ve added a dramatic shallow back to give this model a deeper center of gravity.In addition, the carbon at the crown is crafted ultra-thin （0.6mm） to lower the center of gravity.The synergistic effect of these changes produces the optimal strike angle and spin. This means effortless high trajectory, even for senior golfers and those with less strength.
- * 1
- MG613 edge
- * 2
- previous model
- * 3
- An arched crown yields an optimal strike
With such a sleek design, you’ll be thrilled to own this club!
The back of the head is crafted into a beautifully strea mlined, sloping line. The projection area is visually prominent, giving the golfer the extra boost of confidence they need at setup.
Rectangular face area
Widening the face toward the sole creates a rectangular shape. This construction transforms even those irksome off-center strikes into nice shots!
- * 1
- MG613 Sweet spot
- * 2
- Previous model sweet spot
- * 3
- “Hyper cross”face
- * 4
- MG613 face size
- * 5
- Previous model space size
ARMRQ UD45 SHAFT
Featuring a slightly rigid grip, this club improves stability from the get-go. Though comfortably light, the orbit of the shaft is consistent, ensuring that the club hugs that ball!
MG613 DRIVER
| Head material/ Manufacturing process |
6-4titanium+Carbon / Casting | ||
|---|---|---|---|
| Face material/ Manufacturing process |
6-4titanium / Steel rolling | ||
| Length(inches) | 45.25 | ||
| Shaft | ARMRQ UD45 | ||
| Flex | R | ||
| Loft (deg.) | 10.5 | 11.5 | |
| Head volume (cm3) | 460 | 460 | |
| Lie angle (deg.) | 61.0 | 61.0 | |
| Distance to Center of Gravity(mm) | 39.0 | 39.0 | |
| Height to Center of Gravity(mm) | 33.5 | 33.5 | |
| Depth to Center of Gravity(mm) | 35.5 | 35.5 | |
| Gravity Angle（deg.） | 20.0 | 20.0 | |
| Swing weight | R | C7 | C7 |
| Gross weight (g) | R | 277 | 277 |
Data refers to the 2S grade
ARMRQ UD45
| Material | Carbon+UD SOF® | |
|---|---|---|
| Kick-point | Low | |
| Butt diameter (mm) | 15.4 | |
| Tip diameter (mm) | 8.6 | |
| Flex | R | |
| Gross weight (g) | R | 45.0 |
| Torque (deg.) | R | 5.60 |
| Frequency (cpm) | R | 213 |
Data refers to the 2S /1W
| MG613 Fairway Wood | |
|---|---|
 |
A bold shallow-back design the golfer to lift the ball with tremendous ease. |
| MG603 Iron | |
|---|---|
 |
Performance and shape are tailored to each different club number. This design makes even a long iron easy to hit! |
9 SERIES PROFESSIONAL
