SPEC Z1
A 460cc head with a high moment of inertia and a 45.75-inch ARMRQ 6-Axis Shaft give birth to straight-ahead shots with high trajectory, bringing the hitting distance of your dreams into reach.
Characteristic
Equipped with the ARMRQ 6-Axis Shaft. With the high restorative force of 6 axes, the shaft has sharpness and flexibility that will give your hitting distance a huge boost.
Club thickness is balanced by widened sides, bringing the center of gravity down and enlarging the sweet spot.
- *Some heads with a high moment of inertia fail to hug the ball. The gravity point design of this club solves that problem and also promotes high trajectory and a straight shot.
- * Reduced distance loss on off-center shots
- * Great sound on impact
- * Head project area that compensates for the longer club length
Spec
| AMAZING SPEC Z1 | |||||
|---|---|---|---|---|---|
| Head material/ Manufacturing process |
6-4titanium / Casting | Shaft Material | Carbon+6axis UD SOF® | ||
| Face material / Manufacturing process | 6-4 Titanium/Forged | Shaft Kick-point | Low-Mid | ||
| Shaft | ARMRQ6 3S | Flex | R | L | |
| Flex | S・R(10°)、L(11°) | Shaft Gross weight （g） | 51.0 | 40.5 | |
| Loft (deg.) | 10 | 11 | Torque (deg.) | 4.3 | 5.7 |
| Length(inches) | 45.75 | 44.25 | Frequency (cpm) | 235 | 209 |
| Head volume (cm3) | 460 | ||||
| Lie angle (deg.) | 60.0 | ||||
| Distance to Center of Gravity(mm) | 41.5 | 42.0 | |||
| Depth to Center of Gravity(mm) | 42.0 | ||||
| Swing weight | D2（R 10°） | C4（L 11°） | |||
| Gross weight (g) | 291（R 10°） | 267（L 11°） | |||
※SOF® is a registered trademark of the Polymer processing Research Institute.
※Flex S shaft is made to order.
Sandmaster
Specially designed for bunkers, this 58° loft model will easily bail you out of trouble, regardless of the depth or quality of the sand.
Characteristic
With a top line shape that embraces the ball and a leading edge that picks up and lofts the ball, its design is all about making sand shots easy.
- * A head that maximizes the feeling of a secure hit. You can count on the wide face to loft the ball into the air, even if you’re a bunker-shot novice.
- * Shaped to deliver a secure hit, even when the club face is open.
Spin performance is improved by making the most of the wide face. - * Equipped with a multi-round sole that can handle all kinds of lies and situations.
Spec
| Sandmaster | |
|---|---|
| Head material/ Manufacturing process | FE/Casting |
| Face material / Manufacturing process | Black Nickel Finish |
| Shaft | ARMRQ6 3S、NSPRO950GH |
| Flex | S・R |
| Loft (deg.) | 58.0 |
| Length(inches) | 35.0 |
| Lie angle (deg.) | 63.5 |
| Face progression（mm） | 4.75 |
| Swing weight | D1（R） |
| Gross weight (g) | 408（ARMRQ6 R）、442（NSPRO950GH R） |
※Flex S shaft is made to order.
Chipmaster
A square face Chipper that enhances control on direction, and stability. Approach shots are now a lot easier to aim for a chip-in.
Characteristic
- * The head design makes it easy to find the right direction and to aim the green.
- * Three lines inscribed on the back face help you find the right direction on every shot.
- * The center of gravity design makes your swing feel stable and secure.
Because chip shots are all about direction, the face line design and square shape enhance directional control.
Spec
| Chipmaster | |
|---|---|
| Head material/ Manufacturing process | FE/Casting |
| Face material / Manufacturing process | Satin Finish/2layer Plated + Color |
| Shaft | HP-82 |
| Loft (deg.) | 35.0 |
| Length(inches) | 33.0 |
| Lie angle (deg.) | 71.0 |
| Gross weight (g) | 505 |
Linemaster
A head that ensures the ball stays true to the line of aim and has a smooth roll. Equipping the head with an ARMRQ 6-axis shaft gives birth to the feeling of a soft touch.
Characteristic
The face insert is made of a new material, TPU (390A), which delivers a smooth roll and provides maximum feel. And the amazing balance makes it easy to address and hit the ball.
- * The back parts create a deeper center of gravity. Stainless steel is used to maximize the impact of weights added to the toe and heel.
- * The face is made of alumite-treated aluminum to reduce weight.
- * The sole construction includes 8g of tungsten in the toe and heel, which boosts moment of inertia and makes it easier to hit the ball straight.
Equipped with the ARMRQ 6-Axis Shaft. With the high restorative force and maximum flexure of 6 axes, you will get the feeling of a soft touch and a steady roll when you hit the ball.
Spec
| Linemaster | |
|---|---|
| Material of Face-Body/Manufacturing process | Aluminum/CNC Process |
| Material of Back-Body/Manufacturing process | SUS603+Tungsten/Casting+CNC Process |
| Head plating | Alumite Finish(Face Body)+Satin Finish/2Layer Plated (Back Body) |
| Shaft | ARMRQ6 3S |
| Length(inches) | 34.0 |
| Gross weight (g) | 543 |