TOUR WORLD DRIVER TW727 430 TW727 455 TW727 455S Tw727 460TOUR WORLD DRIVER TW727 430 TW727 455 TW727 455S Tw727 460

TOUR WORLD IRON TW-BM TW727 M TW727 Vn TW727 V Tw727 PTOUR WORLD IRON TW-BM TW727 M TW727 Vn TW727 V Tw727 P

TOUR WORLD FAIRWAY WOODTOUR WORLD FAIRWAY WOOD

TOUR WORLD UTILITYTOUR WORLD UTILITY

TOUR WORLD WEDGETOUR WORLD WEDGE

TOUR WORLD PUTTERTOUR WORLD PUTTER

tit

  • DRIVERDRIVER
  • 430
  • 455
  • 455s
  • 460
  • ironiron
  • tw-bm
  • m
  • vn
  • v
  • p
  • FWFW
  • UTUT
  • UT
  • U
  • WEDGEWEDGE
  • PUTTERPUTTER
  • TOUR WORLD Custom order

TOUR WORLD TW727 430

A Smaller head emphasizes playability.Shallow CG and a strong trajectory with low spin.

The small head balances good looks with control,and is much admired by professionals. Designed with a shallow CG to control spin and deliver a strong trajectory without excessive spring.

TW430

TECHNOLOGYTECHNOLOGY

For example for these players

A head highly valued by professionals with both face design and its performance. The focus is on easy operability by a compact head.

Features

The design has a shallow center of gravity with the weight screw center- arranged to decrease the spin rate compared to the previous model. The tough, sharp head with the black IP finish is preferred by experts.

Crown:3AL-2.5Vtitanium

Hosel:Pure titanium

Sole:G4titanium

10g added weight
for a shallower CG

Face:TI-5Ntitanium

Crown
Imaging a level blow shot
with the high back shape.
No unnecessary warps
with strength targeted at hard hitters.

Sole
A 4g weight added to the sole
creates a shallower CG.

2.75mm

Face
HONMA original face design provides
a wider rebound area while reducing
loss of distance from miss-hit balls.

3.55mm

2.35mm

TW727 430

Comparison with previous model 

The design with a low FP provides a great shot better than it looks at address.
The design has a shallow center of gravity with the weight screw center arranged to decrease the spin rate compared to the previous model.
The tough, sharp head with the black IP finish is preferred by experts.
The big difference is the head which has changed position of the center of gravity and the shallower center of gravity, providing a strong trajectory with a lot of run.
The head is relatively open in appearance but the new design with lower FP provides a better catch, sharp impression, and feeling of ease

TOUR WORLD TW727 455

Shallow CG for low-spin and strong trajectory

An attractive,hefty club head with added ball grip.Excellent playablity, with a shallow CG that delivers a strong,low-spin trajectory.

TW455

TECHNOLOGY

froged-title

High-density forging method
(Industry‘ First)

New variable thickness formability forging method

W-FORGED

Using the Industry’s First high-density forging method gives greater design flexibility.
The high-density forging process maintains hardness but increases strength by about 15%. This results in saving 2g weight which allows greater freedom of design.
New variable thickness design face offers an expanded sweet spot
Proprietary variable thickness design generates the right amount of rebound across a wide area, resulting in an expanded sweet spot.

Tighter fiber flow lines on face

Traditional forging

Advantages of W-FORGED
Expand sweet spot area
and improves the hitting feeling.

sp_455_forged

For example for these players

For golfers who want a long carry and strong trajectory. For golfers who
stick to a good-looking face and a better catching feel, even with a relatively
large head. The excess weight produced by a new manufacturing method provides
the satisfactory function.

Features

The face produced by a new manufacturing method the “W-Forged” and new design
significantly increases the sense of hitting, carry distance, ease of use, and stability.

Crown:
0.5mm KS100titanium
Hosel:
Pure titanium
Sole:
KS100titanium

14g of extra weights added in two
locations to provide optimal CG placement

W-FORGED Expands sweet spot area and gives better hitting feeling

Crown:
A strong trajectory with deflection of the deep head and crown. The shape of the crown does not look 455 and makes the swing easy to follow through.
Sole:
The load objects of 14g in total at two points allow a design with the optimum center of gravity for the target, which reduces the excess spin rate with the low and shallow center of gravity, providing the head mechanism with strong trajectories and higher usability.

4g + 3gweights

Face:
With the face with a new shape produced by a new forging method, the CT value distribution expands, providing a constant carry distance.

sp_455

Comparison with previous model 

The face produced by a new manufacturing method the “W-Forged” and new design significantly increases the sense of hitting, carry distance, ease of use, and stability.
The lower/shallower center of gravity than the low/deep center of gravity of the previous
model leads to a low-spin trajectory and the load objects of 14g provide more easy operability.

TOUR WORLD TW727 455s

Less side spin, with outstanding straight-line stability

A sharp design without too much grip on the ball,providing both stable distance and directionality. Reduces side spin at the high moment of inertia,creating outstanding straight-line stability,

TW455s

TECHNOLOGY

froged-title

High-density forging method
(Industry‘ First)

New variable thickness formability forging method

W-FORGED

Using the Industry’s First high-density forging method gives greater design flexibility.
The high-density forging process maintains hardness but increases strength by about 15%. This results in saving 2g weight which allows greater freedom of design.
New variable thickness design face offers an expanded sweet spot
Proprietary variable thickness design generates the right amount of rebound across a wide area, resulting in an expanded sweet spot.

Tighter fiber flow lines on face

Traditional forging

Advantages of W-FORGED
Expand sweet spot area
and improves the hitting feeling.

sp_455S_forged

For example for these players

For golfers who do not prefer a large head, and want to use a sharp head that looks as easy-to-use as possible. The spot is also well set up and high trajectory of the ball is also one of the desired points. For golfers who want a constant carry and directionality.

Features

The head in a semi-back shape with a larger projected area, provides easy address. The design with a low/deep center of gravity allows players to hit a ball with an appropriate spin rate and high trajectory.

Crown:
0.5mm KS100titanium
Hosel:
Pure titanium
Sole:
KS100titanium

10g of extra weights added
in two locations to provide
optimal CG placement

W-FORGED Expands sweet spot area and gives better hitting feeling

Crown:
The adopted semi-back shape with a larger projected area provides both sharpness and a sense of easy.
Sole:
The load objects of approx. 10g at two points and the weight screw of 4g on the side and the heel provide the deeper center of gravity and higher usability,

Weights on the side (4g) and heel (4g) totaling 8g provide playability and a deeper CG, stabilizing
ball trajectory.

Face:
With the face with a new shape produced by a new forging method, the CT value distribution expands, providing a constant carry.

sp_455S

TOUR WORLD TW727 460

Good grip, low CG and a high trajectory

The shallow-backed form easily delivers high trajectory and extends distance. Use of a W-FORGED face expands the sweet spot area and gives better hitting feeling

TW460

TECHNOLOGY

froged-title

High-density forging method
(Industry‘ First)

New variable thickness formability forging method

W-FORGED

Using the Industry’s First high-density forging method gives greater design flexibility.
The high-density forging process maintains hardness but increases strength by about 15%. This results in saving 2g weight which allows greater freedom of design.
New variable thickness design face offers an expanded sweet spot
Proprietary variable thickness design generates the right amount of rebound across a wide area, resulting in an expanded sweet spot.

Tighter fiber flow lines on face

Traditional forging

Advantages of W-FORGED
Expand sweet spot area
and improves the hitting feeling.

sp_460_forged

For example for these players

As from the previous model, this model focuses on a sense of ease at address,
high trajectories, and a long carry distance. The center-of-gravity design with emphasis on the catch performance and a structure with a low FP make the driver easier to use.

Features

Adopted high-density forged face “W-Forged” face enhances maximum carry performance.
The large head with a low/deep center-of-gravity design and the shallow back shape brings a high launch angle and a stable spin rate,
resulting in an easy-to-use driver for all kinds of players.

Crown:
0.5mm KS100titanium
Hosel:
Pure titanium
Sole:
KS100titanium

10g of extra weight added to
provide optimal CG placement

W-FORGED
Expands sweet spot area
and gives better hitting
feeling

Crown:
The shallow back shape with an effective deflection helps increase the sense of ease and carry.
Sole:
Aiming at a deeper center of gravity and better catching performance, load objects of 10g and heel weights of 4g built in.
4g heel weight provides playability and a deeper CG,stabilizing ball trajectory.
Face:
With the face with a new shape produced by a new forging method, the CT value distribution expands, providing a constant carry distance.

sp_460

Comparison with previous model 

Large head design to hit a stable trajectory and long carry distance.

TOUR WORLD TW-BM

A large muscleback head x amorphous metal fiber help us to more powerfully and easily obtain the kinds of results in terms of distance that we all dream of achieving.

Instead of simply enlarging the size of the head, using CAD to optimize the CG, this club maintains control and great impact feeling, with a larger sweet spot. In addition, we have achieved to create a muscle-back iron that does not give discomfort at the time of address despite two degrees strong loft, and a design to meet the requirement of the professional to achieve higher, more powerful trajectories and greater distances without sacrificing exceptional levels of control.

TW-BMイメージ

TECHNOLOGY テクノロジー

Figure of comparison with TW727M

Figure of comparison with TW727v

sp_m

TOUR WORLD TW727 M

Clean-cutting design delivers superior playability

A club designed for pros looking for the superior spin performance and control needed to win, and the ability to control shots. Long and middle lengths emphasize a flowing face, with a unified short iron head design that provides the uninterrupted line pros prefer.

TW430

TECHNOLOGY

For example for these players

It is suitable for the athlete golfers who are particular about hitting feel and operability.

Features

Like 717M, this model provides a mild sense of hitting, high spin performance , and excellent control performance, all of which are specific to the muscle back forged mechanism.
Considered requests from tournament professional golfers, the top and leading edges are sharp, providing an image of sharper motion with that shape.
In addition, making the pocket appearance uniform in a set of golf clubs provides
the impression of crushing the ball with the same feeling.

Large back face part of body
offers a mild hitting feeling.

The sharp leading edge line is easy to point the target.

Special face design to suits heads
with low designs for each number.

1.9mm

1.7mm

1.4mm

Goose rate

sp_m

Comparison with previous model 

The shape of short iron less than #8 designed with more square image than a previous model. This is a also the demand from a professional tour players.

TOUR WORLD TW727 Vn

A half cavity-back iron with a feeling of muscleback.

The smaller half-cavity provides the hitting feeling that Serious golfers are waiting for. The sharp head design gives easy address,and superior playability, enable dead-on pin targeting.

TW430

TECHNOLOGY

froged-title

Performing two kinds of forgings methods, first a wave pattern twice in S25C, cold forging then hot forging. This is why we name the model WinningForged. "It is subdivided, and fiber flow is formed by making a crystal grain face surface (approximately 0.2mm in width) compression, tininess by cold forging and makes it the high strength of the face side, and making it high toughness. Therefore, the repulsion improves along with the thinning of the club head, and escalope thereby leads to flying distance up without compromising the strength of the face. In addition, due to the high strength of the head, even a miss shot at upper face surface will not effect and pull back its function. Double metal structure by W Forged creates a milder ball hitting feeling. Light weighting by the thinning material raises the flexibility of the head design."

Hot forging

Special cold forging

W-FORGED

Responsive, mild feeling through impact that satisfies the Professional players.

Cross-section view of face surface
High-density face surface with a
depth of 0.2mm

No loss of momentum even when hitting
with the upper portion of the face

Cross-section view (400x magnification)

Double Structures

Normal forging

400x magnification

400x magnification

sp_Vn_forged

For example for these players

“Wants to use muscle irons but a bit difficult. For golfers who do not need carry but want to use a compact cavity back with a good sense of hitting.”This model is newly added to the product lineup in response to these needs of spirited golfers.

Features

There were voices from many professionals that they were waiting for the emergence of the 717V with a normal loft. So it is finally commercialized this time through field tests and modifications. The head shape smaller than 717V with normal loft brings about irons without a carry that is too long. The reduced sole width focuses on sharpness and easy-to-address performance, and its
compact shape provides ease of use in the same way as the 717M.
The W-FORGED method adopts a thick design, which provides the head with a mild sense of hitting, resulting in strong trajectories.

Smallish head shape
which gives the impression
of a muscle cavity.

Orthodox face side with normal loft angle.

The sharp leading edge
with added moderate goose neck.

sp_Vn

TOUR WORLD TW727 V

A cavity-back iron offers both carry distance and playbility.

The head is slightly larger than the Vn,with a thicker sole and a deep cavity. While offering playability that is not too demanding,and improved ball grip,this soft steel cavity iron also pursues great hitting feeling, a strong trajectory, and distance performance.

TW430

TECHNOLOGY

froged-title

Performing two kinds of forgings methods, first a wave pattern twice in S25C, cold forging then hot forging. This is why we name the model WinningForged. "It is subdivided, and fiber flow is formed by making a crystal grain face surface (approximately 0.2mm in width) compression, tininess by cold forging and makes it the high strength of the face side, and making it high toughness. Therefore, the repulsion improves along with the thinning of the club head, and escalope thereby leads to flying distance up without compromising the strength of the face. In addition, due to the high strength of the head, even a miss shot at upper face surface will not effect and pull back its function. Double metal structure by W Forged creates a milder ball hitting feeling. Light weighting by the thinning material raises the flexibility of the head design."

Hot forging

Special cold forging

W-FORGED

Responsive, mild feeling through impact that satisfies the Professional players.

Cross-section view of face surface
High-density face surface with a
depth of 0.2mm

No loss of momentum even when hitting
with the upper portion of the face

Cross-section view (400x magnification)

Double Structures

Normal forging

400x magnification

400x magnification

sp_v_forged

For example for these players

Like 717M, this model provides a mild sense of hitting, high spin performance , and excellent control performance, all of which are specific to the muscle back forged mechanism. Considered requests from tournament professional golfers, the top and leading edges are sharp, providing an image of sharper motion with that shape. In addition, making the pocket appearance uniform in a set of golf clubs provides the impression of crushing the ball with the same feeling.

Features

717M has a rounded shape similar to a short iron, whereas 727M has a tough head shape focused on a rectangular impression as a whole from iron #8 along with #7. The forging method adopted a
long cooling time, provides a milder sense of hitting. The sharp slits in the toe &
heel section drive the motivation for challenging swings.

Loft angle comparison between Vn and V

Size comparison between Vn and V

Loft angle comparison between Vn and V

The half cavity developed a low center of
gravity and slighty large head gives
more comfort at address.

Slightly bigger face shape gives more comfort at address.

Neck designe to catch the ball with ease.

2.5mm

2.0mm

2.0mm

Goose rate

sp_v

Comparison with previous model 

Adoptin the W-FORGED method, exceed the former model in easiness of high launch, solid feel and strong trajectory.

TOUR WORLD TW727 P

Pursuing distance and ball grip

Two-piece structure achieves improved trajectory height and distance.With an enhanced high moment of inertia,the head provides outstanding straight-line stability.

TW430

TECHNOLOGY

For example for these players

This has been developed under the concept of a longer carry and easier to hit. The thick top blade head shape with a larger head size provides a sense of ease greater than the previous model. The slightly more intense gooseneck shape brings about strong trajectories. The design with a wide sole width and a shape for smooth motion after the impact, provides both the smooth motion after the impact and the ease of hitting a ball to a high altitude.
This model is intended for golfers who want a club that has a sharp looks, and also carries easily.

Features

This model head is little bigger than a previous work and enlarge the sweat area.
And having more goose, it makes more easy- to-hit club.
The two-piece cavity mechanism inherits the shape of the V to enhance the sense of uniformity with M/V in design.
The face thickness of a long iron is 2.4 mm for carry performance.
The thickness of the middle iron is 2.7 mm and focused on spin performance and a sense of hitting, both of which allow players to aim at a deadly position to the pin.
The #11 and SW has a cavity back integrated mechanism to pursue the functions as a wedge.

Low center of gravity, high MOI head.

Sharp loft angle are not noticeble with a big face shape.

Thicker top blade creates powerful impact.

Semi-goose design for solid grip

A slightly wider, clean-cutting form.

Long iron design emphasizes
distance performance,
with a face thickness of 2.4mm
for improved rebound
and greater distance.

Middle iron design emphasizes
spin performance and feel on impact,
with a face thickness of
2.7mm to enable
dead-on targeting of the pin.

11 and SW designs focus solely on
wedge functionality, with a unified
cavity-back structure for distance
stability and spin performance.

Maraging,
high-tensile
stainless steel

Soft iron forged body

High-precision center-of –gravity design made possible by CNC processing. By creating a pocket cavity, this club features a deep center of gravity and corresponds to a high moment of inertia.

sp_p

Comparison with previous model 

The head volume is slightly bigger than the former model, and enlarge the sweet spot area.

TOUR WORLD TW727 FW

Selectively volumized cup face emphasizes distance.

A head that provides ease of address and stability, along with a larger, thinner face, expand rebound area and improve distance.

TW460

TECHNOLOGY

Features

This is a model with a lot of request from professionals reflected back which we believe the best in our history and highly valued by Koumei Oda, a professional golfer.

By adopting professional golfers opinion, we made more clear difference between 13 degrees and 15 degrees #3W.

The relatively large head focuses on easy-to-address performance and easy operability. A face set up thinner than the former ones results in a large face, providing a higher bouncing force.

3W/13°

3W/15°

Widened the width of the
scoreline to allow the
face side more visible at address.

Straight scoreline is
easy to aim at a target.

3W/13°

3W/15°

5W/18°

7W/21°

3W/13°
Deep CG design for
higher trajectory

3W/15°
Shallow CG design for
strong trajectory

The 13° deep center-of -gravity design easily realizes high trajectories, and 15°and #5 and #7 is a shallow center-of-gravity design that focuses on strong trajectories depending on their respective roles.

Center of gravity comparison.

Approx. a 10% increase in projected area

#3/15°

#3/13°

#3/15°
Shallow center of
gravity of the
strong trajectory.

#3/13°
Center of gravity
depth to hit the
ball high.

13 Large head ・deep center of gravity ・high center of gravity position providing tee shot feeling
15 :Large head ・same center of gravity position with more shallow center of gravity

The cup face mechanism
with partially different thickness
increases the bouncing force

Straight-Line section of leading edge

sp_fw

Comparison with previous model 

Large head size than the former model gives more comfort at address, and by setting face wall thickness thinner able to enlarge repulsion.

TOUR WORLD TW727 UT

Ease of address and stable distance

At the request of the pros, an enlarged head creates ease of address and a stable trajectory. A deep CG improves straight-line stability, enabling a dead-on attack of the pin.

TW460

TECHNOLOGY

Features

Aiming at UT that ensures players hit the target, we have gathered comments from many professional and focused on easy operability , high-performance and stable trajectories.

To address easily, straight lines are provided to the toe and the leading edge.
In addition, this features the combination of a relatively low FP for higher catching performance, and excellent stability.

By providing a straight line along the toe and leading edge (portions in red),
this design makes it easier to target during ball address.

The head larger than the previous model with weights further attached on the side brings about UT with a deep center of gravity design, allowing players to easily spin the ball with a stable trajectory.

Approx. a 10% increase in projected area P

6g weight

Grade mark

Individual club CG design

U/16°

U/19°

U/22°

sp_ut

Comparison with previous model 

The head larger than the previous model with weights further attached on the side brings about UT with a deep center of gravity design, allowing players to easily spin the ball with a stable trajectory.

TOUR WORLD TW727 UT

Utility Irons Recommended by Tour Pros

TW-Uイメージ

TECHNOLOGY テクノロジー

These clubs use ES230 maraging steel with high strength and high repulsion for the face. The face is edge-welded to the body, making it possible to achieve higher resiliency and longer distances.

We've added weight to the hollow toe and optimized its weight distribution with the hosel, resulting in high moment of inertia around the neck and achieving the head tracking performance that pros demand.

These clubs offer an even lower and deeper center of gravity by adding of 10-g tungsten screw to the body designed with a wide sole and low center of gravity, giving pros the trajectory control they desire.

The subtle height difference between the toe and heel gives you the feel of hugging the ball, making it easier to maintain a straight line to the target.

The stylish goose shape and delicately shaped round sole let you visualize the ease of grabbing and carrying the ball, and let you reach the green accurately even at long range. These blades carefully designed by our craftsmen, match the wide-sole structure that most advanced golfers trying to avoid, are beautiful in shape and easy to use, providing an overall head shape that pros prefer.

A wide sole for better swing-through Face chamfering.

Intended to provide both easy hit and good swing , with a sole design.

That lets you keep the face oriented in the direction you visualize.

PLAYER

These clubs feel really good to hit with, and even as a pro I judge them to be good. With the three number and four, you can hit the ball high and aim for the green, so I think amateur golfers should consider using these too.

The ball is easy to lift and gets good distance.
I get good swing-through and can hit the ball with strength. These clubs get frequent use for tee shots on tight holes. The are reliable equipment for demanding tournament settings.

sp_tw_u

sp_tw_u

TOUR WORLD TW727 UT

The Perfect Tanihara Model.
The mild steel forged wedge which meets the professional golfers strict demands.

TW460

TECHNOLOGY

Line up for loft / bounce which fulfills every style of enthusiastic players.

Loft・Bounce Line UP 50° 52° 56°- 08° 56°- 12° 58°- 08° 58°- 12° 60°
Features

Focus on the Face(50°、52°)

  • Allowing the line from the edge to the toe to fall off slightly reinforces the sense that the ball won't draw left.
  • A sharper line around the neck and a raised toe area gives a sense of driving through the ball.
  • Based on demands made by professional golfers, we narrowed the neck and enlarged the toe to render sharpness while showcasing a head that is larger than its predecessor. The consistency in the transition from the TW727 short irons is also superb, such that players should be able to swing the club with the exact same feel regardless of the shot they choose to play.

Focus on Smooth Impact

  • C shape grind sole of 56°58°and 60°provides.Smooth Impact through any type of lie and make it possible to achives spin on the ball.
  • 50°and 52°soles offer appropriate bounce angle,while the rounded shape won't easily dig in.
  • TW-W adapts the shape and specification which pro player Tanihara uses. The moderately goose shape, matched the same design with the irons.
    In response, the head shape consists of a goose-neck style with an emphasis on consistency. This helps in transition from the long irons to the wedges, to create the same feel, regardless of the club selected. The head has been made slightly larger as part of our focus on offering a face form and contour curves that allow the player to address the ball with confidence.
  • The 50° / 52° heads provide a straight leading edge inspired by the TW727 iron series that enables the player to aim dead-center at the pin.
    The 56° / 58° / 60° heads aid in ability to comfortably flight the ball with minimum effort.
    The 56° / 58° heads feature two bounce angles to provide players an unlimited variety of possible shot making.

Featuring a desired finish to the face.

  • As with the TW727 iron, the TW-W is a forged mild steel club. The face has been CNC milled with a complete flat surface for consistency in contact and enhance the spin performance. The needs of professional golfers are met both in terms of form and function.
  • The grooves and toe area has a bead blast finish to impart a visual sense and create a more abrasive surface so a larger portion of the face can be used during impact. In this case, we aimed to produce proper technique on the part of players input.
    Players should also be able to concentrate more effectively thanks to a finish that prevents glare. This is a wedge that allows professional and better amateur players to demonstrate their various shot techniques to their fullest skill level.

sp_wedge

TOUR WORLD TW-PT

Good head stability and feel.This is what TEAM HONMA demands from this model.

We created a base for a stable sole and completion of a solid-looking model. Furthermore, using milled SUS303 stainless steel, created a solid feel for the TW-PT.

TECHNOLOGY テクノロジー

Mallet
(Center-Shaft)
Blade
(Crank-Neck)
An aluminum sole, lightenes the central portion
Two 14g tungsten weights in the sole with increased MOI.
*Tungsten weight is not adjustable.
By the advice of Professional player Komei Oda(JGTO), a drilled hosel was engineered to make the toe side heavier and lighten the heel. This lowers the center of gravity and realizes stable stroke.

CONCEPT コンセプト

Good head stability and feel.This is what TEAM HONMA demands from this model.

TOUR WORLD has been chosen by tour pros who are the best at the sport.

TEAM HONMA and development supervisors exchange opinions frequently, and make it possible to create a club in response to their needs. At the moment, TW-PT putter is the result.

The first TOUR WORLD putter required approximately three years of research and development. It was completed by gathering professional requests in the same way as we did for the driver and irons..We were very particular extending over details, such as head stability, shape of the sole, overall material, color, design and aesthetics.

構えた時のすわり、ターゲットライン、ネック部、ソール形状、フェースアングル、幅、ソール素材、重心、グリップ、色、総重量

At first, the development does not advance, if we did not understand the request for a putter with good head stability which a professional much prefers.

We created a base for a stable sole and completion of a solid-looking model. Furthermore, using milled SUS303 stainless steel, created a solid feel for the TW-PT.

TW-PT Development adviser
Mr.Hideto Tanihara (JGTO)

TW-PT Development adviser
Mr.Hideto Tanihara (JGTO)

With many tour pros opinions, we made many prototypes and tested millions of times!

  • TOUR WORLD Custom order