The old models list

  • *The printing model has become for catalog printing to a part of.
  • *The product which has a variation in a wearing shaft has published the part.
  • *The storage term of the parts for repair will be five years after the manufacture close in principle.
    However, when stock of applicable parts is lost according to the contents of repair, I may be unable to do correspondence with
    a substitute, or repair.
  • * "-" ... The relevance # (No.) is not manufactured with the product.
  • *"Blank" ... There is no data.

TW717 430Launching year 2013

Head material / Manufacturing process Sole: G4 Titanium 
Crown:3AL-2.5V Titanium / Forged
Face material / Manufacturing process 6-4V Titanium / Forged
Shaft ARMRQ8 62,ARMRQ8 54
VIZARD TA75,TA65,TC75,TC65,TZ75,TZ65
Length (inches) 45.25
Loft (deg.) 8.5 9.5 10.5
Head volume(cm3) 430
Lie angle (deg.) 58.5
Distance to center of gravity (mm) 38.0
Height to Center of Gravity (mm) 34.5
Depth to center of gravity (mm) 38.5
Gravity Angle (deg.) 22.0
Swing weight・
Gross weight (g)
ARMRQ8 62 R D1 311
S D2 316
ARMRQ8 54 R D1 305
S D2 310
TA TZ75 S D2 324
TC75 S D2 323
TA TC TZ65 SR D2 315
S D2 317

TW717 455Launching year 2013

Head material / Manufacturing process Sole,Crown KS100/Forged
Face material / Manufacturing process VL Titanium / Forged
Shaft ARMRQ8 62,ARMRQ8 54
VIZARD TA75,TA65,TC75,TC65,TZ75,TZ65
Length (inches) 45.5
Loft (deg.) 9.5 10.5
Head volume(cm3) 455
Lie angle (deg.) 58.5
Distance to center of gravity (mm) 38.5
Height to Center of Gravity (mm) 35.0
Depth to center of gravity (mm) 39.0
Gravity Angle (deg.) 22.0
Swing weight・
Gross weight (g)
ARMRQ8 62 R D1 311
S D2 316
ARMRQ8 54 R D1 305
S D2 310
TA TZ75 S D2 323
TC75 S D2 322
TA TC TZ65 SR D2 314
S D2 316

TW717 460Launching year 2013

Head material / Manufacturing process Sole: G4 Titanium
Crown:3AL-2.5V Titanium / Forged
Face material / Manufacturing process 6-4V Titanium / Forged
Shaft ARMRQ8 62,ARMRQ8 54
VIZARD TA65,TA55,TC65,TC55,TZ65
Length (inches) 45.5
Loft (deg.) 9.5 10.5
Head volume(cm3) 460
Lie angle (deg.) 59.0
Distance to center of gravity (mm) 39.5
Height to Center of Gravity (mm) 35.5
Depth to center of gravity (mm) 40.0
Gravity Angle (deg.) 23.5
Swing weight・
Gross weight (g)
ARMRQ8 62 R D1 311
S D2 316
ARMRQ8 54 R D1 305
S D2 310
TA TC TZ65 SR D2 314
S D2 316
TA55 R D1 306
S D2 311
TC55 R D1 305
S D2 310

TW717 FWLaunching year 2013

Head material / Manufacturing process SUS630/Casting
Face material / Manufacturing process High-Strength Customed Steel cup face / Forged
Shaft ARMRQ8 62,ARMRQ8 54
VIZARD TA75,TA65,TA55,TC75,TC65,TC55,TZ75,TZ65
# (No.) #3/13° #3/15° #5/18° #7/21°
Loft (deg.) 13 15 18 21
Head volume(cm3) 158 156 149 137
Length (inches) 42.75 42.75 42.25 41.75
Lie angle (deg.) 58.5 58.5 59.0 59.0
Distance to center of gravity (mm) 32.5 32.5 32.5 32.0
Height to Center of Gravity (mm) 22.5 22.5 23.0 23.5
Depth to center of gravity (mm) 30.0 30.0 30.0 30.0
Gravity Angle (deg.) 22.0 21.0 20.0 18.5
Swing weight・
Gross weight (g)
ARMRQ8 62 R D0 328 D0 328 D0 332 D0 336
S D1 333 D1 333 D1 337 D1 341
ARMRQ8 54 R D0 321 D0 321 D0 325 D0 329
S D1 326 D1 326 D1 330 D1 334
TA TC TZ75 S D2 341 D2 341 D2 345 D2 349
TA TZ65 SR D2 332 D2 332 D2 336 D2 340
S D2 334 D2 334 D2 338 D2 342
TC65 SR D2 333 D2 333 D2 337 D2 341
S D2 335 D2 335 D2 339 D2 343
TA55 R D1 323 D1 323 D1 327 D1 331
S D2 328 D2 328 D2 332 D2 336
TC55 R D1 322 D1 322 D1 326 D1 330
S D2 327 D2 327 D2 331 D2 335

S-03 Left HandedLaunching year 2014

S-03 Left Handed
Head material/Manufacturing process Crown:3AL-2.5V Titanium Sole:G4 Titanium / Forged SUS630 / Forged
Face material Ti‐5N(α‐β titanium alloy) High-strength Custom Steel
Shaft ARMRQ8 49, ARMRQ8 54, ARMRQ8 45
Length(inches) 46.0
#(No.) 1W 3W 5W
Loft (deg.) 9.5 10.5 15 18
Head volume(cm3 460 460 198 184
Lie angle (deg.) 59.5 59.5 59.5 60.0
Distance to Center of Gravity(mm) 42.5 42.5 33.5 33.0
Height to Center of Gravity(mm) 36.0 36.5 26.0 26.0
Length of Hitting Point(mm) 22.0 21.5 10.0 10.0
Depth to Center of Gravity(mm) 37.0 38.0 33.0 32.0
Gravity Angle(deg.) 21.0 21.0 24.0 22.0
Swing weight

Gross weight (g)
ARMRQ8 49 R D1・282 D1・282 D0・299 D0・303
SR D2・285 D2・285 D1・302 D1・306
S D2・286 D2・286 D1・303 D1・307
ARMRQ8 54 R D1・291 D1・291 D0・310 D0・314
S D2・295 D2・295 D1・314 D1・318
ARMRQ8 45 R D1・278 D1・278 D0・296 D0・300
Data refers to the 2S grade

S-03Launching year 2014

S-03
Head material/Manufacturing process Crown:3AL-2.5V Titanium Sole:G4 Titanium / Forged SUS630 / Forged
Face material Ti‐5N(α‐β titanium alloy) High-strength Custom Steel
Shaft ARMRQ8 49, ARMRQ8 54, ARMRQ8 45
Length(inches) 46.0
#(No.) 1W 3W 5W 7W
Loft (deg.) 9.5 10.5 15 18 21
Head volume(cm3 460 460 198 184 172
Lie angle (deg.) 59.5 59.5 59.5 60.0 60.5
Distance to Center of Gravity(mm) 42.5 42.5 33.5 33.0 33.0
Height to Center of Gravity(mm) 36.0 36.5 26.0 26.0 26.0
Length of Hitting Point(mm) 22.0 21.5 10.0 10.0 9.5
Depth to Center of Gravity(mm) 37.0 38.0 33.0 32.0 32.0
Gravity Angle(deg.) 21.0 21.0 24.0 22.0 19.5
Swing weight

Gross weight (g)
ARMRQ8 49 R D1・282 D1・282 D0・299 D0・303 D0・307
SR D2・285 D2・285 D1・302 D1・306 D1・310
S D2・286 D2・286 D1・303 D1・307 D1・311
ARMRQ8 54 R D1・291 D1・291 D0・310 D0・314 D0・318
S D2・295 D2・295 D1・314 D1・318 D1・322
ARMRQ8 45 R D1・278 D1・278 D0・296 D0・300 D0・304
Data refers to the 2S grade

E-03Launching year 2014

E-03
Head material/Manufacturing process 6-4 Titanium / Casting SUS630 / Forged
Face material 6-4 Titanium High-strength Custom Steel
SHAFT ARMRQ8 45
#(No.) 1W 3W 5W 7W 9W
Length(inches) 45.5 43.0 42.5 42.0 41.5
Loft (deg.) 10.5 11.5 16 19 22 25
Head volume(cm3) 460 460 178 167 160 151
Lie angle (deg.) 60.0 60.0 60.0 60.5 61.0 61.5
Distance to Center of Gravity(mm) 41.5 42.0 30.5 31.5 32.5 33.0
Height to Center of Gravity(mm) 34.0 34.5 25.5 26.0 26.5 27.0
Length of Hitting Point(mm) 21.5 20.5 9.0 8.0 7.0 6.0
Depth to Center of Gravity(mm) 39.5 40.0 34.0 33.5 33.0 32.5
Gravity Angle(deg.) 25.0 25.0 27.5 25.5 24.5 23.5
Swing weight

Gross weight (g)
ARMRQ8 45 R C8・275 C8・275 C7・288 C7・292 C7・296 C7・300
Data refers to the 2S grade

S-02Launching year 2012

S-02
Shaft ARMRQ6 49,ARMRQ6 54,ARMRQ6 45
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 15 18 21
Swing weight D1 D0
Gross weight (g) 283 302 306 309
ARMRQ 6 49 In the case of 2S grade / R

E-01Launching year 2011

E-01
Shaft ARMRQ6 45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 10.5 11.5 16 19 22 25
Swing weight C8 C7
Gross weight (g) 278 292 296 300 304
ARMRQ6 45 In the case of 2S grade / R

C-01Launching year 2011

C-01
Shaft ARMRQ6 54,ARMRQ6 62
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 14 17 20
Swing weight D1 D0
Gross weight (g) 296 313 316 319
ARMRQ6 54 In the case of 2S grade / R

S-01 LeftyLaunching year 2011

S-01
Shaft ARMRQ 6 49/ARMRQ 6 54 / ARMRQ 6 45
#(No.) 1W 3W 5W
Loft(deg.)(°) 10 15 18
Swing weight D1 D0
Gross weight (g) 283 302 306
ARMRQ UD49 In the case of 2S grade / R

S-01Launching year 2011

Shaft ARMRQ 6 49/ARMRQ 6 54 / ARMRQ 6 45
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 15 18 21
Swing weight D1 D0
Gross weight (g) 283 302 306 309
ARMRQ UD49 In the case of 2S grade / R

MG710Launching year 2010

MG710
Shaft ARMRQ UD49 / ARMRQ UD54 / ARMRQ UD45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 287 304 307 310 313
ARMRQ UD49 In the case of 2S grade / R

TW914Launching year 2009

TW914
Shaft ARMRQ UD62
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 14 17 20
Swing weight D1 D0
Gross weight (g) 315 328 331 335
In the case of 2S grade / R

MG813Launching year 2009

MG813
Shaft ARMRQ UD54
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 298 312 316 319 323
In the case of 2S grade / R

MG613Launching year 2009

MG613
Shaft ARMRQ UD45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 10.5 11.5 16 19 22 25
Swing weight C7 C6
Gross weight (g) 277 293 297 300 304
In the case of 2S grade / R

MG713Launching year 2008

MG713
Shaft ARMRQ UD49
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 285 299 302 305 308
In the case of 2S grade / R

MG713 for Lefty Launching year 2008

MG713 for Lefty
Shaft ARMRQ UD49 / ARMRQ UD62 / ARMRQ UD54 / ARMRQ UD45
#(No.) 1W 3W 5W
Loft(deg.)(°) 10 15 18
Swing weight D1 D0
Gross weight (g) 285 299 302
ARMRQ UD49 In the case of 2S grade / R

MG612Launching year 2008

MG612
Shaft ARMRQ UD45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 10.5 11.5 16 19 22 25
Swing weight C7 C6
Gross weight (g) 277 291 294 297 301
In the case of 2S grade / R

MG812 Launching year 2007

MG812
Shaft ARMRQ UD54
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 298 311 314 318 322
In the case of 2S grade / R

TW913 Launching year 2007

TW913
Shaft ARMRQ UD62
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 14 17 20
Swing weight D1 D0
Gross weight (g) 313 325 329 333
In the case of 2S grade / R

MG712Launching year 2006

MG712
Shaft ARMRQ B49
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 287 301 303 307 310
In the case of 2S grade / R

TW912Launching year 2006

TW912
Shaft ARMRQ B62
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 14 17.5 20 22.5
Swing weight D1 D0
Gross weight (g) 314 326 329 332 336
In the case of 2S grade / R

MG811Launching year 2006

MG811
Shaft ARMRQ B54
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D0 C9
Gross weight (g) 297 309 312 315 318
In the case of 2S grade / R

MG811for LeftyLaunching year 2006

MG811for Lefty
Shaft ARMRQ B62 / ARMRQ B54 / ARMRQ B49 / ARMRQ B45
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 15 18 21
Swing weight D0 C9
Gross weight (g) 297 309 312 315
ARMRQ B54 In the case of 2S grade / R

MG611Launching year 2006

MG611
Shaft ARMRQ B45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 16 19 22 25
Swing weight C7 C6
Gross weight (g) 275 288 291 295 299
In the case of 2S grade / R

TW911Launching year 2005

TW911
Shaft ARMRQ B62
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 14 17 20 23
Swing weight D1 D0
Gross weight (g) 314 323 328 331 334
In the case of 2S grade / R

MG711Launching year 2005

MG711
Shaft ARMRQ B49
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 284 298 302 305 310
In the case of 2S grade / R

ATHPORT Ⅲ e+Launching year 2010

ATHPORT
Shaft ATHPORT Ⅲ +ARMRQ 53
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 297 314 317 321 324
R

ATHPORTLaunching year 2009

ATHPORT
Shaft +ARMRQ 62
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 314 328 332 336 339
R

ATHPORT e+Launching year 2009

ATHPORT e+ HONMA
Shaft +ARMRQ 53
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 297 313 317 320 324
R

ATHPORTLaunching year 2007

ATHPORT
Shaft ATHPORT 60
#(No.) 1W 3W 5W 7W
Loft(deg.)(°) 9 10 14 17 20
Swing weight D1 D0
Gross weight (g) 310 325 328 331
R

ATHPORT e+Launching year 2007

ATHPORTe+
Shaft ATHPORT 50
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 298 311 314 318 321
R

ATHPORT e+ for LeftyLaunching year 2007

ATHPORT e+ for Lefty
Shaft ATHPORT 50
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 9 10 15 18 21 24
Swing weight D1 D0
Gross weight (g) 298 311 314 318 321
R

HT-01Launching year 2011

HT-01
Head material / Manufacturing process 6-4 titanium / Casting SUS630 / Casting
Face material / Manufacturing process 6-4 titanium / Rolling High-strength custom steel / Rolling
Shaft ARMRQ HT55
Flex R,S
#(No.) 1W 3W 5W 7W
Loft(deg.) 10 15 18 21
Length(inches) 45.5 43.0 42.5 42.0
Head volume(cm3) 460 -
Lie angle(deg.) 60.0 59.5 60.0 60.5
Distance to center of gravity(mm) 39.0 -
Depth to center of gravity(mm) 38.5 -
Swing weight D1(R),D2(S) D0(R),D1(S)
Gross weight(g) 288(R),291(S) 303(R),306(S) 306(R),309(S) 309(R),312(S)
2S

E-03 LadiesLaunching year 2014

e-03 Ladies
Head material/Manufacturing process 6-4 Titanium / Casting SUS630 / Forged
Face material 6-4 Titanium High-strength Custom Steel
Shaft ARMRQ8 40
#(No.) 1W 3W 5W 7W 9W
Length(inches) 44.25 41.75 41.25 40.75 40.25
Loft (deg.) 10.5 11.5 12.5 16 19 22 25
Head volume(cm3) 460 460 460 178 167 160 151
Lie angle (deg.) 60.0 60.0 60.0 60.0 60.5 61.0 61.5
Distance to Center of Gravity(mm) 41.5 42.0 42.0 30.5 31.5 32.5 33.0
Height to Center of Gravity(mm) 34.0 34.5 35.0 25.5 26.0 26.5 27.0
Length of Hitting Point(mm) 21.5 20.5 20.0 9.0 8.0 7.0 6.0
Depth to Center of Gravity(mm) 39.5 40.0 40.5 34.0 33.5 33.0 32.5
Gravity Angle(deg.) 25.0 25.0 25.0 27.5 25.5 24.5 23.5
Swing weight

Gross weight (g)
ARMRQ8 40 L C3・264 C3・264 C3・264 C1・278 C1・282 C1・286 C1・290
Data refers to the 2S grade

TW717 460 LadiesLaunching year 2013

Head material / Manufacturing process Sole: G4 Titanium
Crown:3AL-2.5V Titanium / Forged
Face material 6-4V Titanium / Forged
Shaft ARMRQ8 45,VIZARD TA50
Length (inches) VIZARD 45.0
ARMRQ 44.25
Loft (deg.) 11.5
Head volume(cm3) 460
Lie angle (deg.) 59.0
Distance to center of gravity (mm) 39.5
Height to Center of Gravity (mm) 35.5
Depth to center of gravity (mm) 40.0
Gravity Angle (deg.) 23.5
Swing weight・
Gross weight (g)
ARMRQ8 45 L C6 276
TA50 R-2 C8 276

TW717 FW LadiesLaunching year 2013

Head material / Manufacturing process SUS630/Casting
Face material High-Strength Customed Steel cup face / Forged
Shaft ARMRQ8 45,VIZARD TA50
# (No.) 3W 5W 7W 9W
Length (inches) VIZARD 42.5 42.0 41.5 41.0
ARMRQ 41.75 41.25 40.75 40.25
Loft (deg.) 16 19 22 25
Head volume(cm3) 158 149 136 126
Lie angle (deg.) 59.0 59.0 59.5 59.5
Distance to center of gravity (mm) 31.0 31.0 31.0 31.0
Height to Center of Gravity (mm) 22.5 23.0 23.0 23.5
Depth to center of gravity (mm) 30.5 30.5 30.0 30.0
Gravity Angle (deg.) 21.0 18.0 17.0 17.0
Swing weight・
Gross weight (g)
ARMRQ8 45 L C6 292 C6 296 C6 300 C6 304
TA50 R-2 C7 290 C7 294 C7 298 C7 302

HT-01 LadiesLaunching year 2011

HT-01 Ladies
Head material / Manufacturing process 6-4 titanium / Casting SUS630 / Casting
Face material / Manufacturing process 6-4 titanium / Rolling High-strength custom steel / Rolling
Shaft ARMRQ HT45
Flex L
#(No.) 1W 3W 5W 7W
Loft(deg.) 11 16 19 22
Length(inches) 44.25 41.75 41.25 40.75
Head volume(cm3) 460 -
Lie angle(deg.) 60.5 60.0 60.5 61.0
Distance to center of gravity(mm) 41.0 -
Depth to center of gravity(mm) 38.0 -
Swing weight C3 C1
Gross weight(g) 267 279 282 286
2S

E-01 LadiesLaunching year 2011

E-01 Ladies
Shaft ARMRQ6 40
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 13 16 19 22 25
Swing weight C3 C1
Gross weight (g) 267 279 283 287 291
2S/L

ATHPORT Ⅲ e+ LadiesLaunching year 2010

ATHPORT Ⅲ e+ Ladies
Shaft ATHPORTⅢ +ARMRQ 45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 13 16 19 22 25
Swing weight C7 C6
Gross weight (g) 278 294 297 301 305
L

ML513Launching year 2009

ML513
Shaft ARMRQ UD40
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 13 16 19 22 25
Swing weight C3 C1
Gross weight (g) 268 281 285 289 293
In the case of 2S grade / L

ATHPORTe+ LadiesLaunching year 2009

ATHPORTe+ Ladies
Shaft +ARMRQ 45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 13 16 19 22 25
Swing weight C7 C6
Gross weight (g) 278 293 297 300 304
In the case of L

ML512Launching year 2008

ML512
Shaft ARMRQ UD40
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 13 16 19 22 25
Swing weight C3 C0
Gross weight (g) 268 279 283 286 289
In the case of 2S grade / L

ATHPORT e+ LadiesLaunching year 2007

ATHPORTe+ Ladies
Shaft ATHPORT 45
#(No.) 1W 3W 5W 7W 9W
Loft(deg.)(°) 11.5 13 15 18 21 24
Swing weight C7 C6
Gross weight (g) 275 288 290 294 298

ML511Launching year 2006

ML511
Shaft ARMRQ B40
#(No.) 1W 3W 5W 7W 9W 11W
Loft(deg.)(°) 11.5 13 18 21 24 27 30
Swing weight C0 B9
Gross weight (g) 260 270 274 279 282 286
In the case of 2S grade / L

Youth golferLaunching year 2011

No. / Loft (deg.) 1W/15 FW/24 UT/32
Head material / Manufacturing process Titanium / Press SUS630 / Casting
Head volume(cm3) 410 - -
Shaft Carbon
Length (inches) 35.0 33.0 30.0
Total weight (g) 255 267 279
Youth golfer: Height 120 cm ~
* Total weight is an estimate.

KidsLaunching year 2011

No. / Loft (deg.) 1W/18
Head material / Manufacturing process Aluminium / Press
Head volume(cm3) 315
Shaft Glass + Carbon
Length (inches) 28.0
Total weight (g) 260
Kids golfer: Height 100 cm~
* Total weight is an estimate.

55th Anniversary Model 5StarsLaunching year 2012

#(No.) 1W 3W 5W
Head material Body : G4 Ti Face : 6-4 Titanium Body : SUS630 / Face :High strength custom steel
Manufacturing process Body : Casting Face : Forged Body : Casting / Face :Steel rolling
Shaft ARMRQ 55th 5S
Flex R / S
#(No.) 1W 3W 5w
Loft (deg.) 10 15 18
Length (inches) 45.75 43.0 42.5
Head volume (cm3) 460 170 155
Lie angle (deg.) 59.5 59.5 60.0
Face progression (mm) 19.5 16.0 17.5
Swing weight R D1 D0 D0
S D2 D1 D1
Gross weight (g) R 287 302 306
S 290 305 309
Distance to center of gravity (mm) 39.5 33.0 33.0
Height to center of gravity (mm) 36.0 24.0 24.5
Depth to center of gravity (mm) 37.0 31.0 30.0

55th Anniversary Model 3StarsLaunching year 2012

# (No.) 1W 3W 5W
Head material Body : G4 Ti / Face : 6-4 Titanium Body : SUS630 / Face :High strength custom stee
Manufacturing process Body : Casting / Face : Forged Body : Casting / Face :Steel rolling
Shaft ARMRQ 55th 3S
Flex R / S
Loft (deg.) 10 15 18
Length (inches) 45.75 43.0 42.5
Head volume (cm3) 460 170 155
Lie angle (deg.) 59.5 59.5 60.0
Face progression (mm) 19.5 16.0 17.5
Swing weight R D1 D0 D0
S D2 D1 D1
Gross weight (g) R 287 302 306
S 290 305 309
Distance to center of gravity (mm) 39.5 33.0 33.0
Height to center of gravity (mm) 36.0 24.0 24.5
Depth to center of gravity (mm) 37.0 31.0 30.0

Perfect Switch DRIVERLaunching year 2011

Head material / Manufacturing process 6-4 titanium / Casting
Face material 6-4 titanium
Flex R,S
Loft (deg.) 10
Length (inches) 45.75
Head volume(cm3) 450
Face angle(F.A.) H 0.5
Lie angle(deg.) 59.0
Distance to center of gravity(mm) 36.0
Depth to center of gravity(mm) 36.0
ARMRQ6 Perfect Switch 3S Swing weight R D1
S D2
Gross weight(g) R 297
S 300

Perfect Switch FWLaunching year 2011

Head material / Manufacturing process SUS630/Casting
Face material High-strength Custom Steel
No. 3W 5W 7W
Loft (deg.) 15 18 21
Lie angle(deg.) 57.5 58.0 58.5
ARMRQ6 Perfect Switch
3S Shaft
Length (inches) 43.0 42.5 42.0
Swing weight R D0
S D1
Gross weight(g) R 316 319 323
S 319 322 326

G1X DRIVERLaunching year 2014

Head material / manufacturing process 811Titanium / Casting
Face material / manufacturing process 6-4Titanium / Rolled
Shaft G1X-700,G1X-500
Length(inches) 46.0
Loft(deg.) 9.5 10.5
Head volume(cm3 460
Lie angle(deg.) 58.0
Distance to Center of Gravity(mm) 37.0 37.5
Height to Center of Gravity(mm) 34.0 34.5
Depth to center of gravity(mm) 36.5
Gravity Angle(deg.) 22.0 21.5
Swing weight・ Gross weight(g) G1X-700 R D3・308
S D3・310
G1X-500 R D1・299
S D1・301

G1X FWLaunching year 2014

Head material / manufacturing process SUS630 / Casting
Face material / manufacturing process High-strength custom steel / Rolled
Shaft G1X-700,G1X-500
# (No.) 3W 5W
Loft(deg.) 15 18
Head volume(cm3 182 167
Length(inches) 43.0 42.5
Lie angle(deg.) 58.5 59.0
Distance to Center of Gravity(mm) 34.0 33.0
Height to Center of Gravity(mm) 22.5 22.0
Depth to center of gravity(mm) 29.0 28.5
Gravity Angle(deg.) 17.5 16.5
Swing weight・ Gross weight(g) G1X-700 R D3
328 332
S D3
330 334
G1X-500 R D2
316 320
S D2
318 322

IS-03 Left HandedLaunching year 2014

IS-03 Left Handed
Head material/Manufacturing process Mild-steel / Forged (body) + ES230 (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 49, ARMRQ8 54, ARMRQ8 45
Flex R,SR,S
# (No.) 5 6 7 8 9 10 11 AW SW
Loft (deg.) 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.75 2.75 3.00 3.00 3.75 3.75 3.75 4.75
Distance to Center of Gravity(mm) 37.0 37.0 37.0 37.0 36.5 36.5 36.5 36.5 36.5
Height to Center of Gravity(mm) 19.0 19.5 19.5 20.5 20.5 21.0 21.0 21.5 22.0
Depth to Center of Gravity(mm) 6.0 6.0 6.0 6.0 5.0 5.0 4.5 3.0 3.0
Gravity Angle(deg.) 11.0 - - - - - - - -
Swing weight・
Gross weight (g)
ARMRQ8 49 R C8・360 C8・366 C8・373 C8・379 C8・385 C8・391 C8・398 C8・398 C9・401
SR C9・363 C9・369 C9・376 C9・382 C9・388 C9・394 C9・401 C9・401 D0・404
S C9・364 C9・370 C9・377 C9・383 C9・389 C9・395 C9・402 C9・402 D0・405
ARMRQ8 54 R D0・364 D0・370 D0・377 D0・384 D0・390 D0・396 D0・402 D0・402 D1・405
S D1・368 D1・374 D1・381 D1・388 D1・394 D1・400 D1・406 D1・406 D2・409
ARMRQ8 45 R C8・357 C8・363 C8・369 C8・375 C8・381 C8・387 C8・393 C8・393 C9・396
Data refers to the 2S grade

IS-03 景勝“KEISHO”Launching year 2014

IS-03 景勝“KEISHO”
Head material/Manufacturing process Mild-steel / Forged (body) + ES230 (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 49
Flex R,SR,S
# (No.) 5 6 7 8 9 10 11 AW SW
Loft (deg.) 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.75 2.75 3.00 3.00 3.75 3.75 3.75 4.75
Distance to Center of Gravity(mm) 37.0 37.0 37.0 37.0 36.5 36.5 36.5 36.5 36.5
Height to Center of Gravity(mm) 19.0 19.5 19.5 20.5 20.5 21.0 21.0 21.5 22.0
Depth to Center of Gravity(mm) 6.0 6.0 6.0 6.0 5.0 5.0 4.5 3.0 3.0
Gravity Angle(deg.) 11.0 - - - - - - - -
Swing weight・
Gross weight (g)
R C8・360 C8・366 C8・373 C8・379 C8・385 C8・391 C8・398 C8・398 C9・401
SR C9・363 C9・369 C9・376 C9・382 C9・388 C9・394 C9・401 C9・401 D0・404
S C9・364 C9・370 C9・377 C9・383 C9・389 C9・395 C9・402 C9・402 D0・405
Data refers to the 3S grade

IS-03 東海道“TOKAIDO”Launching year 2014

IS-03 東海道“TOKAIDO”
Head material/Manufacturing process Mild-steel / Forged (body) + ES230 (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 49
Flex R,SR,S
# (No.) 4 5 6 7 8 9 10 11 AW SW
Loft (deg.) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle (deg.) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.25 2.75 2.75 3.00 3.00 3.75 3.75 3.75 4.75
Distance to Center of Gravity(mm) 36.5 37.0 37.0 37.0 37.0 36.5 36.5 36.5 36.5 36.5
Height to Center of Gravity(mm) 18.5 19.0 19.5 19.5 20.5 20.5 21.0 21.0 21.5 22.0
Depth to Center of Gravity(mm) 6.0 6.0 6.0 6.0 6.0 5.0 5.0 4.5 3.0 3.0
Gravity Angle(deg.) - 11.0 - - - - - - - -
Swing weight・
Gross weight (g)
R C8・354 C8・360 C8・366 C8・373 C8・379 C8・385 C8・391 C8・398 C8・398 C9・401
SR C9・357 C9・363 C9・369 C9・376 C9・382 C9・388 C9・394 C9・401 C9・401 D0・404
S C9・358 C9・364 C9・370 C9・377 C9・383 C9・389 C9・395 C9・402 C9・402 D0・405
Data refers to the 3S grade

IS-03Launching year 2014

IS-03
Head material/Manufacturing process Mild-steel / Forged (body) + ES230 (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 49, ARMRQ8 54, ARMRQ8 45
Flex R,SR,S
# (No.) 4 5 6 7 8 9 10 11 AW SW
Loft (deg.) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle (deg.) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.25 2.75 2.75 3.00 3.00 3.75 3.75 3.75 4.75
Distance to Center of Gravity(mm) 36.5 37.0 37.0 37.0 37.0 36.5 36.5 36.5 36.5 36.5
Height to Center of Gravity(mm) 18.5 19.0 19.5 19.5 20.5 20.5 21.0 21.0 21.5 22.0
Depth to Center of Gravity(mm) 6.0 6.0 6.0 6.0 6.0 5.0 5.0 4.5 3.0 3.0
Gravity Angle(deg.) - 11.0 - - - - - - - -
Swing weight・
Gross weight (g)
ARMRQ8 49 R C8・354 C8・360 C8・366 C8・373 C8・379 C8・385 C8・391 C8・398 C8・398 C9・401
SR C9・357 C9・363 C9・369 C9・376 C9・382 C9・388 C9・394 C9・401 C9・401 D0・404
S C9・358 C9・364 C9・370 C9・377 C9・383 C9・389 C9・395 C9・402 C9・402 D0・405
ARMRQ8 54 R D0・358 D0・364 D0・370 D0・377 D0・384 D0・390 D0・396 D0・402 D0・402 D1・405
S D1・362 D1・368 D1・374 D1・381 D1・388 D1・394 D1・400 D1・406 D1・406 D2・409
ARMRQ8 45 R C8・352 C8・357 C8・363 C8・369 C8・375 C8・381 C8・387 C8・393 C8・393 C9・396
Data refers to the 2S grade

IE-03Launching year 2014

IE-03
Head material/Manufacturing process SUS630 / Casting・ Maraging stainless steel
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 45
# (No.) 4 5 6 7 8 9 10 11 SW
Loft (deg.) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle (deg.) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face progression(mm) 2.25 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Distance to Center of Gravity(mm) 36.5 36.5 37.0 37.0 37.5 37.5 37.0 37.0 35.5
Height to Center of Gravity(mm) 20.0 20.0 20.0 20.5 21.0 21.0 21.5 21.0 21.5
Depth to Center of Gravity(mm) 5.5 5.5 5.3 5.3 5.0 4.5 3.6 3.1 3.0
Gravity Angle(deg.) - 12.5  - - - - - - -
Swing weight・
Gross weight (g)
ARMRQ8 45 R C7・335 C7・340 C7・345 C7・351 C7・356 C7・362 C7・369 C7・375 C8・376
Data refers to the 2S grade

IS-02Launching year 2012

IS-02
Head material / Manufacturing process Forged (body) +SAE8655 (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ6 49,ARMRQ6 54,ARMRQ6 45
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.45 2.75 3.05 3.25 3.25 3.25 3.75 3.75 3.75 3.75
Swing weight C8 C9
Gross weight (g) 356 362 368 374 380 387 393 400 400 402
ARMRQ6 49 2S grade / R

IE-01Launching year 2011

IE-01
Head material / Manufacturing process SUS630 / Casting (body) + Maraging stainless steel (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ6 45
#(No.) 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face progression(mm) 2.25 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Swing weight C7 C8
Gross weight (g) 335 340 345 350 356 363 370 376 378
ARMRQ6 45 2S grade / R

IC-01Launching year 2011

IC-01
Head material / Manufacturing process #3-7:MS225 / Casting (body) + Maraging stainless steel (face)
#8-SW:Mild steel / Casting
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ6 54,ARMRQ6 62,NS PRO 950GH
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 63.5
Face progression(mm) 3.8 3.8 3.8 3.8 4.3 4.3 4.3 4.3 4.8 4.75
Swing weight D0 D1
Gross weight (g) 354 359 365 371 378 385 392 399 406 408
ARMRQ6 54 2S grade / R

IS-01 LeftyLaunching year 2011

Head material / Manufacturing process SUS630 / Casting (body) + Maraging stainless steel (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ6 49/ARMRQ6 54/ARMRQ6 45
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.75 3.75 4.25 4.25 4.25 4.75 4.75 4.75 4.75
Swing weight C8 C9
Gross weight (g) 354 360 366 372 378 385 392 398 398 401
ARMRQ6 49 In the case of 2S grade / R

IS-01Launching year 2011

IS-01
Head material / Manufacturing process SUS630 / Casting (body) + Maraging stainless steel (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ6 49/ARMRQ6 54/ARMRQ6 45
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.75 3.75 4.25 4.25 4.25 4.75 4.75 4.75 4.75
Swing weight C8 C9
Gross weight (g) 354 360 366 372 378 385 392 398 398 401
ARMRQ6 49 In the case of 2S grade / R

MG700Launching year 2010

MG700
Head material / Manufacturing process SUS630(body)+High-strength Custom Steel(face) / Casting(body)+Rolling(face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ UD49/ARMRQ UD54/ARMRQ UD45
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75 4.75 4.75
Swing weight C8 C9
Gross weight (g) 354 360 366 373 379 386 393 399 398 400
ARMRQ UD49 In the case of 2S grade / R

TW904Launching year 2009

TW904
Head material / Manufacturing process Mild Steel/Forged
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD62 / NS PRO 950GH / DG(Dynamic Gold)
#(No.) 3 4 5 6 7 8 9 10
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.5
Face progression(mm) 3.45 3.45 3.75 3.75 3.75 3.75 3.75 4.25
Swing weight D0
Gross weight (g) 364 369 376 382 389 395 402 409
ARMRQ UD62 In the case of 2S grade / R

MG803Launching year 2009

MG803
Head material / Manufacturing process #3-#7・SUS630(body)+ES230(face) / Casting(body)+Rolling(face)
#8-SW・Soft Stainless MS225/Casting
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD54/NS PRO 950GH
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 63.5
Face progression(mm) 3.25 3.25 3.25 3.50 3.75 4.25 4.25 4.25 4.75 5.25
Swing weight D0 D1
Gross weight (g) 357 362 368 374 382 388 394 401 408 410
ARMRQ UD54 In the case of 2S grade / R

MG603Launching year 2009

MG603
Head material / Manufacturing process SUS630(body)+High-strength Custom Steel(face) / Casting(body)+Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD45
#(No.) 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.25 3.25 3.25 3.75 3.75 3.75 4.25 4.75
Swing weight C7 C8
Gross weight (g) 334 340 345 352 357 363 370 375 378
In the case of 2S grade / R

MG703Launching year 2008

MG703
Head material / Manufacturing process SUS630(body) + High-strength Custom Steel(face) / Casting(body) + Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD49
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75 4.75 4.75
Swing weight C7 C8
Gross weight (g) 350 356 362 368 375 381 387 393 393 395
In the case of 2S grade / R

MG703 for LeftyLaunching year 2008

MG703 for Lefty
Head material / Manufacturing process SUS630(body) + High-strength Custom Steel(face) / Casting(body) + Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD49/ARMRQ UD62/ARMRQ UD54/ARMRQ UD45
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75 4.75 4.75
Swing weight C7 C8
Gross weight (g) 350 356 362 368 375 381 387 393 393 395
ARMRQ UD49 In the case of 2S grade / R

MG602Launching year 2008

MG602
Head material / Manufacturing process SUS630(body)+High-strength Custom Steel(face) / Casting(body)+Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD45
#(No.) 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.25 3.45 3.75 4.25 4.25 4.25 4.75 5.25
Swing weight C6 C7
Gross weight (g) 333 338 343 348 354 360 366 372 374
In the case of 2S grade / R

TW903Launching year 2007

TW903
Head material / Manufacturing process Mild Steel / Casting
Head plating Satin Finish / 3-layer Plated
Shaft ARMRQ UD62/NS PRO 950GH/Dynamic Gold(DG)
#(No.) 3 4 5 6 7 8 9 10
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.5
Face progression(mm) 3.25 3.25 3.55 3.55 3.75 4.25 4.25 4.75
Swing weight D0
Gross weight (g) 362 367 373 379 385 392 399 406
ARMRQ UD62 In the case of 2S grade / R

MG802Launching year 2007

MG802
Head material / Manufacturing process SUS630(body)+ES230(face) / Casting(body)+Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD54/NS PRO 950GH
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.5 63.5 64.0
Face progression(mm) 2.75 2.75 3.25 3.45 3.75 4.25 4.25 4.25 4.75 5.25
Swing weight D0 D1
Gross weight (g) 357 361 367 373 379 386 393 400 406 409
ARMRQ UD54 In the case of 2S grade / R

MG702Launching year 2007

MG702
Head material SUS630(body) + Custom475 Steel(face) / Casting(body) + Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ B49
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.80 3.80 3.80 3.80 4.30 4.30 4.30 4.80 4.80 4.80
Swing weight C7 C8
Gross weight (g) 352 358 364 369 375 382 389 395 395 397
In the case of 2S grade / R

MG601Launching year 2006

MG601
Head material SUS630 Body + High-strength Custom Steel Face
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ B45
#(No.) 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 1.75 1.75 2.75 3.25 3.25 3.25 3.75 4.25 4.75
Swing weight C5 C6
Gross weight (g) 331 335 340 346 351 357 363 370 372
In the case of 2S grade / R

MG801Launching year 2006

MG801
Head material Mild Steel Casting(Body) + Mild Steel Casting(Face)
Head plating Satin Finish 2-layer Plated(4S-2S) / Mirror finish(1S)
Shaft ARMRQ B54
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - -
Lie angle(deg.)(°) 59.1 59.6 60.1 60.7 61.4 62.1 62.8 63.5 63.5 64.0
Face progression(mm) 2.75 2.75 3.05 3.25 3.45 3.75 3.75 4.25 4.75 5.25
Swing weight C9 D0
Gross weight (g) 355 360 367 372 379 386 392 397 405 406
In the case of 2S grade / R

TW902Launching year 2005

TW902
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Shaft Dynamic Gold(DG)
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5 - -
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - -
Lie angle(deg.)(°) 59.0 59.5 60.0 60.8 61.5 62.3 63.0 63.5 - -
Face progression(mm) 4.50 4.50 4.75 5.00 5.25 5.35 5.50 5.75 - -
Swing weight D1 - -
Gross weight (g) 412 418 424 432 439 446 452 461 - -
In the case of 2S grade / R

MG702Launching year 2007

MG702
Head material SUS630(body) + Custom475 Steel(face) / Casting(body) + Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ B49
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 19.5 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.80 3.80 3.80 3.80 4.30 4.30 4.30 4.80 4.80 4.80
Swing weight C7 C8
Gross weight (g) 352 358 364 369 375 382 389 395 395 397
In the case of 2S grade / R

TW901Launching year 2005

TW901
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Shaft ARMRQ B62 / NS PRO 950GH
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5 - -
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - -
Lie angle(deg.)(°) 59.0 59.5 60.0 60.8 61.5 62.3 63.0 63.5 - -
Face progression(mm) 4.25 4.25 4.25 4.25 4.25 4.75 4.75 4.75 - -
Swing weight C9(ARMRQ),D1(NS PRO 950GH) - -
Gross weight (g) 361 366 372 377 384 389 396 402 - -
In the case of 2S grade / R

MG701Launching year 2005

MG701
Head material SUS630 Body + Custom475 Steel Face
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ B49
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - -
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 1.75 1.75 2.25 2.55 2.75 3.25 3.55 3.75 3.75 4.25
Swing weight C7 C8
Gross weight (g) 346 351 356 362 368 373 380 387 393 395
In the case of 2S grade / R

ATHPORT Ⅲ e+Launching year 2010

ATHPORT Ⅲ e+
Head material / Manufacturing process High-strength Stainless / Casting
Head plating Double-layer plating / Satin finish + Painted finish
Shaft +ARMRQ53, NS PRO 950GH
Flex R,S
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 20.0 23.0 26.0 29.0 33.0 37.0 42.0 47.0 52.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.25 2.75 2.75 3.25 3.25 3.75 3.75 4.25 4.25
Swing weight C9 D0
Gross weight (g) 355 360 366 371 378 384 390 397 398 400
+ARMRQ53 R

ATHPORTLaunching year 2009

ATHPORT HONMA
Head material / Manufacturing process SUS630 / Casting
Head plating Satin Finish 2-layer Plated
Shaft NS PRO 950GH
Flex R,S
#(No.) 3 4 5 6 7 8 9 10
Loft(deg.)(°) 20.0 23.0 26.0 29.0 33.0 37.0 41.0 46.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0
Face progression(mm) 3.25 3.75 3.75 3.75 3.75 4.25 4.25 4.75
Swing weight D1
Gross weight (g) 387 394 401 407 413 421 428 435
R

ATHPORT e+Launching year 2009

ATHPORT e+ HONMA
Head material / Manufacturing process SUS630 / Casting
Head plating Satin Finish 2-layer Plated + Painted finish
Shaft +ARMRQ 53 / NS PRO 950GH
Flex R,S
#(No.) 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 20.0 23 26.0 29.0 33.0 37.0 42.0 47.0 52.0 56.0
Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75 4.75
Swing weight C9 D0
Gross weight (g) 357 362 367 373 379 386 391 399 400 402
+ARMRQ 53 R

ATHPORTLaunching year 2007

ATHPORT
Head material / Manufacturing process Mild Steel / Casting
Head plating Mirror finish / 3-layer Plated
Shaft NS PRO 950GH/DG
Flex NS PRO 950GH R,S / DG R400,S200
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5 - -
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - -
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.5 - -
Face progression(mm) 3.25 3.25 3.75 3.75 3.75 4.25 4.25 4.75 - -
Swing weight D1 - -
Gross weight (g)(NS PRO 950GH-R) 388 394 400 406 413 420 427 434 - -

ATHPORT e+Launching year 2007

ATHPORT e+
Head material / Manufacturing process Mild Steel / Casting
Head plating Satin Finish / 3-layer Plated
Shaft ATHPORT 50
Flex R,S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) - 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) - 2.25 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75
Swing weight - C9 D0
Gross weight (g) - 352 358 363 369 376 381 388 394 397
R

ATHPORT e+ for LeftyLaunching year 2007

ATHPORT e+ for Lefty
Head material / Manufacturing process Mild Steel/Casting
Head plating Satin Finish / 3-layer Plated
Shaft ATHPORT 50
Flex R,S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) - 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) - 2.25 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75
Swing weight - C9 D0
Gross weight (g) - 352 358 363 369 376 381 388 394 397
R

IE-03 Ladies 雅“MIYABI”Launching year 2014

IE-03 Ladies 雅“MIYABI”
Head material/Manufacturing process SUS630 / Casting・ Maraging stainless steel
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 40
Flex L
# (No.) 5 6 7 8 9 10 11 SW
Loft (deg.) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face progression(mm) 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Distance to Center of Gravity(mm) 36.5 37.0 37.0 37.5 37.5 37.0 37.0 35.5
Height to Center of Gravity(mm) 20.0 20.0 20.5 21.0 21.0 21.5 21.0 21.5
Depth to Center of Gravity(mm) 5.3 5.3 5.3 4.9 4.5 3.6 3.1 3.0
Gravity Angle(deg.) 12.5 - - - - - - -
Swing weight・Gross weight (g) L C0・326 C0・331 C0・337 C0・343 C0・349 C0・355 C1・364 C1・364
Data refers to the 3S grade

IE-03 LadiesLaunching year 2014

IE-03 Ladies
Head material/Manufacturing process SUS630 / Casting・ Maraging stainless steel
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 40
# (No.) 5 6 7 8 9 10 11 SW
Loft (deg.) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face progression(mm) 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Distance to Center of Gravity(mm) 36.5 37.0 37.0 37.5 37.5 37.0 37.0 35.5
Height to Center of Gravity(mm) 20.0 20.0 20.5 21.0 21.0 21.5 21.0 21.5
Depth to Center of Gravity(mm) 5.3 5.3 5.3 4.9 4.5 3.6 3.1 3.0
Gravity Angle(deg.) 12.5 - - - - - - -
Swing weight・Gross weight (g) ARMRQ6 40 L C0・326 C0・331 C0・337 C0・343 C0・349 C0・355 C1・364 C1・364
Data refers to the 2S grade

TW717 P LadiesLaunching year 2013

Head material/Manufacturing process Forged
Face material Maraging stainless steel (face) : No.5~No.10
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 45,VIZARD I550
# (No.) 5 6 7 8 9 10 11 SW
Loft (deg.) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Lie angle (deg.) 60.5 61 61.5 62 62.5 63 63 63.5
Face progression(mm) 3.75 4.00 4.25 4.55 4.75
Distance to center of gravity (mm) 35.0 35.0 35.0 35.0 35.0 35.0 33.0 33.0
Height to Center of Gravity (mm) 20.5 20.5 21.0 21.0 21.0 21.5 21.5 21.5
Depth to center of gravity (mm) 4.0 3.5 3.0 3.0 2.5 2.0 2.0 2.0
Gravity Angle (deg.) 11.5 - - - - - - -
VIZARD
I500
Length (inches) 37.5 37.0 36.5 36.0 35.5 35.0 34.5 34.5
Swing weight R2 C7 C8
Gross weight (g) R2 341 346 353 359 367 373 380 382
ARMRQ8 45 Length (inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Swing weight L C6 C7
Gross weight (g) L 340 345 351 358 364 370 378 380

HT-01G LadiesLaunching year 2011

HT-01G Ladies
Head material / Manufacturing process (Body) SUS630 / Casting (Face) Maraging Stainless Steel
Head Finish Satin Finish / 2-layer Plated+Plated Finish(Silver)
Number #5 #6 #7 #8 #9 #10 #11 SW
Length(inch) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Loft (deg.) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face Progression (mm) 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Swing Weight C1 C2
Total Weight (g) 322 326 333 339 346 352 359 360
2S

IE-01 LadiesLaunching year 2011

IE-01 Ladies
Head material / Manufacturing process SUS630 / Casting (body) + Maraging stainless steel (face)
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ6 40
Flex L
#(No.) 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face progression(mm) 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Swing weight C0 C1
Gross weight (g) 324 329 335 341 348 354 363 363
2S / L

ATHPORT Ⅲ e+ LadiesLaunching year 2010

ATHPORT Ⅲ e+ Ladies
Head material / Manufacturing process High-strength Stainless / Casting
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ATHPORTⅢ +ARMRQ 45
Flex L
#(No.) 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 23.0 26.0 29.0 33.0 37.0 42.0 47.0 52.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.75 2.75 3.25 3.25 3.75 3.75 4.25 4.25
Swing weight C6 C7
Gross weight (g) 337 342 348 354 361 367 374 375 377
L

ATHPORT e+ LadiesLaunching year 2009

ATHPORT e+ HONMA Ladies
Head material / Manufacturing process SUS630 / Casting
Head plating Satin Finish 2-layer Plated + Painted finish
Shaft +ARMRQ 45
Flex L
#(No.) 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 23.0 26.0 29.0 33.0 37.0 42.5 47.0 52.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75 4.75
Swing weight C6 C7
Gross weight (g) 337 343 349 356 362 368 375 376 378
L

ML503Launching year 2009

ML503
Head material / Manufacturing process SUS630(body)+High-strength Custom Steel(face) / Casting(body)+Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD40
Flex L
#(No.) 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 34.0 34.5 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.75 3.25 3.25 3.25 3.75 4.25 4.25
Swing weight C0 C1
Gross weight (g) 325 330 336 342 348 354 363 363
In the case of 2S grade / L

ML502Launching year 2008

ML502
Head material / Manufacturing process SUS630(body) + High-strength Custom Steel(face)/Casting(body) + Rolling(face)
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ UD40
Flex L
#(No.) 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.75 3.25 3.25 3.25 3.25 3.75 4.25
Swing weight C0 C1
Gross weight (g) 325 330 335 341 347 354 363 363
In the case of 2S grade / L

ATHPORT e+ LadiesLaunching year 2007

ATHPORT e+ Ladies
Head material / Manufacturing process Mild Steel / Casting
Head plating Satin Finish / 3-layer Plated
Shaft ATHPORT 45
Flex L
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - - 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) - - 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) - - 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) - - 2.75 3.25 3.25 3.75 3.75 4.25 4.25 4.75
Swing weight - - C6 C7
Gross weight (g) - - 333 339 345 351 357 364 371 374

ML501Launching year 2006

ML501
Head material SUS630 Body + High-strength Custom Steel Face
Head plating Satin Finish 2-layer Plated
Shaft ARMRQ B40
#(No.) 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 1.75 2.75 3.25 3.25 3.25 3.75 4.25 4.75
Swing weight B9 C0
Gross weight (g) 320 325 331 337 343 348 358 358
In the case of 2S grade / L

TM-504C ARMRQ846Launching year 2005

Head material Mild steel
Head plating Satin Finish / 3-layer Plated
Shaft ARMRQ 846
Flex L
#(No.) 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 60.5 61.5 61.5 62.0 62.0 63.0 63.0 63.0
Face progression(mm) 2.25 2.75 2.75 3.50 3.75 3.75 3.75 3.75
Swing weight B9
Gross weight (g) 322 327 332 338 344 350 360 360
The above data are standard values for the ARMRQ 846 1S(L/38.0A)Shaft.

MG-818 ARMRQ843Launching year 2005

Head material Mild steel
Head plating Double-layer plating / Satin finish
Shaft ARMRQ 843
Flex L
#(No.) 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 1.75 1.75 2.25 2.75 2.75 3.25 3.75 3.75
Swing weight C5
Gross weight (g) 337 343 349 356 362 370 376 378
The above data are standard values for the ARMRQ 843 3S(L/38.0A)Shaft.

TM-602 SK-550Launching year 2005

Head material SUS630 Hollow epoxy resin containing
Head plating Double-layer plating / Satin finish
Shaft SK-550
Flex L
#(No.) 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 37.5 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 1.25 2.25 2.25 2.75 3.25 3.25 3.75 3.75 3.75
Swing weight C5
Gross weight (g) 329 334 340 346 352 358 364 372 373
The above data are standard values for the SK-550 (L/38.0A)Shaft.

TwinMarks Dual Attack i-Ladies
ACCELERATE Force FW&FWLaunching year 2004

Head material SUS630+Titanium
Head plating Semi-gloss finish
Shaft ACCELERATE Force FW&FW
Flex L
#(No.) 6 7 8 9 10 11 SW
Loft(deg.)(°) 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle(deg.)(°) 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.25 2.75 2.75 3.75 3.75 3.75
Swing weight C4
Gross weight (g) 351 357 363 369 376 384 386
The above data are standard values for the ACCELERATE Force FW&FW (L/38.0A)Shaft.

CLOSSATTACK2 LadiesLaunching year 2001

CLOSSATTACK2 Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 56
Length(inches) - 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 34.5 34.5
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Gross weight (g) - 345 350 357 363 370 376 383 390 399 401

2000β LadiesLaunching year 2001

2000β Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 56
Length(inches) - 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 34.5 34.5
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Gross weight (g) - 346 351 357 363 370 376 383 390 398 401

F&F LadiesLaunching year 2000

F&F Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 56
Length(inches) - 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 34.5 34.5
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Gross weight (g) - 324 329 336 341 347 353 359 367 372 374

CROSSATTACK Ladies/Doric FeatherⅢLaunching year 2000

CROSSATTACK Ladies/Doric FeatherⅢ
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 42 46 53
Length(inches) - 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Gross weight (g) - 344 349 355 360 367 374 380 388 397 401

2000α Ladies/Doric FeatherⅢLaunching year 2000

2000α Ladies/Doric FeatherⅢ
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 42 46 53
Length(inches) - 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Gross weight (g) -   349 354 361 367 374 381 386 397 401

NEW BIG-LB H&F LadiesLaunching year 1997

NEW BIG-LB H&F Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 65.0

LB-606 NEW H&F LadiesLaunching year 1997

LB-606 NEW H&F Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

LB-280 NEW H&F LadiesLaunching year 1997

LB-280 NEW H&F Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 64.5

LB-606 H&F LadiesLaunching year 1996

LB-606 H&F Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

NEW LB-280 LadiesLaunching year 1995

NEW LB-280 Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°)   60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 64.5

LB-606 LadiesLaunching year 1993

LB-606 Ladies
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

CL-608 LADIES CLASSICLaunching year 1990

CL-608 LADIES CLASSIC
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated(Also handling Satin Finish.)
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 60.0 60.5 61.0 62.0 62.5 63.5 63.5 64.5 64.5 66.0

CL-606 LadiesLaunching year 1986

CL-606 Ladies
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated(Also handling Satin Finish.)
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 61.0 61.0 61.5 62.0 63.0 63.5 64.0 65.0 66.0 66.0

International L +2Launching year 1985

International L +2
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated (Also handling Satin Finish.)
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - - - 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - - - 62.0 63.0 63.5 65.0 65.3 65.5 66.0 66.0

CL-606 Ladies +2Launching year 1985

CL-606 Ladies +2
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated (Also handling Satin Finish.)
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 61.0 61.0 61.5 62.0 63.0 63.5 64.0 65.0 66.0 66.0

FE-400 CUSTOM MODELLaunching year 1991

FE-400 CUSTOM MODEL
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated *Also handling Satin Finish.
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 41 45 49 54 58
Lie angle(deg.)(°)
[For black shaft]
- 59.5 60.0 60.5 61.0 61.5 62.0 63.0 63.5 64.0 66.0  

New DC4Launching year 1988

New DC4
Head material Nickel
Head plating Black barrel finish of the nickel material
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 31 35 39 43 47 51 - -
Lie angle(deg.)(°)
[For steel shaft]
60.5 61.0 61.5 61.5 62.5 63.5 63.5 64.0 65.0 65.0 - -

DC500Launching year 1988

DC500
Head material Nickel
Head plating Black barrel finish of the nickel material
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 41 45 49   58
Lie angle(deg.)(°) -                      

HLM600Launching year 1988

HLM600
Head material Nickel
Head plating Black barrel finish of the nickel material
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 56.5 57.5 58.0 59.0 60.0 60.5 61.0 62.0 62.5 62.5 62.5

HPM220PLaunching year 1988

HPM220P
Head material Nickel
Head plating Black barrel finish of the nickel material
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°)
[For steel shaft]
- 58.5 59.0 60.5 60.5 61.5 62.5 62.5 63.0 64.0 64.0 64.0

SuperiorLaunching year 1987

Superior
Head material Mild Steel
Head plating 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) -                      

SF-707Launching year 1985

SF-707
Head material Mild Steel
Head plating 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 16 19 22 25 29 33 37 41 45 49 - 58
Lie angle(deg.)(°) 58.5 60.5 61.0 61.0 61.5 62.5 62.5 63.5 64.5 64.5 -  

Prancer PLaunching year 1982

Prancer P
Head material Mild Steel
Head plating 3-layer Plated *There are Satin finish and Glossy finish.
(The initial model : Chrome plating)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 42 46 51 - -
Lie angle(deg.)(°) -                   - -

FE-3000Launching year 1981

FE-3000
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated (The initial model : Chrome plating)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 26 30 34 38 42 46 51 - 58
Lie angle(deg.)(°) -                   - 66.0

FE-800Launching year 1981

FE-800
Head material Mild Steel
Head plating 3-layer Plated(The initial model : Chrome plating)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 41 45 49 - 58
Lie angle(deg.)(°) - 58.5 60.0 60.5 61.0 62.0 63.5 63.5 64.5 64.5 -  

FE-700Launching year 1981

FE-700
Head material Mild Steel
Head plating 3-layer Plated *There are Satin finish and Glossy finish.
(The initial model : Chrome plating)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 41 45 49 - 58
Lie angle(deg.)(°)
[For steel shaft]
- 59.0 60.0 61.5 62.5 62.5 63.0 63.5 63.5 64.5 -  
Lie angle(deg.)(°)
[For carbon shaft]
- 59.5 60.5 62.0 63.0 63.0 63.5 64.0 64.0 65.0 -  

FE-400Launching year 1981

FE-400
Head material Mild Steel
Head plating 3-layer Plated *There are Satin finish and Glossy finish.
(The initial model : Chrome plating)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 31 35 39 43 47 51 - 58
Lie angle(deg.)(°)
[For steel shaft]
  61.0 60.5 61.5 62.5 62.5 62.0 64.0 64.5 65.5 -  

PP-117Launching year 1991

PP-117
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 42 46 50 54 -
Lie angle(deg.)(°)
[For black shaft]
- 58.0 58.0 59.0 59.5 60.5 61.0 61.5 62.0 62.5 62.5 -

PP-727Launching year 1988

PP-727
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 41 45 49 54 -
Lie angle(deg.)(°)
[For black shaft]
- 57.5 58.5 59.5 59.5 60.0 60.5 61.5 62.0 63.0 63.5 -

PP-737Launching year 1988

PP-737
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 19 22 25 29 33 37 42 46 50 54 -
Lie angle(deg.)(°)
[For black shaft]
- 58.0 59.0 60.0 60.0 61.5 62.0 62.5 63.0 63.5 64.0 -

CL-708 GDLaunching year 1988

CL-708 GD
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°)
[For black shaft]
- 59.0 60.0 60.5 61.0 62.0 63.0 64.0 64.0 64.0 65.0 66.0

CL-606 GDLaunching year 1988

CL-606 GD
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 58.5 59.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 66.0

CL-505 GDLaunching year 1988

CL-505 GD
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 58.5 59.0 59.5 59.5 60.0 61.0 62.5 62.5 64.0 65.0 66.0

EXD500 GDLaunching year 1988

EXD500 GD
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) - 55.5 56.5 57.5 58.5 59.5 60.5 61.0 61.5 62.5 62.5 64.0

PP-717Launching year 1986

PP-717
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 16 19 22 25 29 33 37 42 46 50 54 -
Lie angle(deg.)(°)
[For black shaft]
  58.5 59.5 60.0 61.0 61.5 62.5 63.5 63.5 64.0 64.0 -

CL-505Launching year 1986

CL-505
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated (Also handling Satin Finish.)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°)
[For black shaft]
-   60.5 60.5 61.0 62.0 62.5 63.0 63.5 64.0 65.5 66.0

CL-708Launching year 1985

CL-708
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated (Also handling Satin Finish.)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 59.5 60.0 60.0 60.5 61.0 62.0 63.5 63.5 65.0 65.0 66.0

CL-606Launching year 1985

CL-606
Head material Mild Steel
Head plating Gloss Finish / 3-layer Plated (Also handling Satin Finish.)
#(No.) 1 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) - 17 20 23 27 30 34 38 42 46 50 58
Lie angle(deg.)(°) - 59.5 60.0 60.5 61.0 61.5 62.0 63.0 64.0 65.0 65.0 66.0

LB-606G NEWH&FLaunching year 1998

LB-606G NEWH&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

LB-280G NEWH&FLaunching year 1998

LB-280G NEWH&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 65.0

LB-737 NEWH&F PSLaunching year 1997

LB-737 NEWH&F PS
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19 22 25 29 33 37 42 46 50 54 58
Lie angle(deg.)(°) 59.0 60.0 60.5 61.0 61.5 62.0 62.5 63.0 64.0 64.0 65.0

LB-737 NEW H&F +2Launching year 1997

LB-737 NEW H&F +2
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 58.0 59.0 60.0 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0

LB-708 NEWH&FLaunching year 1997

LB-708 NEWH&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

LB-606 NEW H&FLaunching year 1997

LB-606 NEW H&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

LB-280 NEW H&FLaunching year 1997

LB-280 NEW H&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 64.5

NEW BIG-LB H&FLaunching year 1997

NEW BIG-LB H&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 65.0

LB-737 H&FLaunching year 1995

LB-737 H&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19 22 25 29 33 37 42 46 50 54 58
Lie angle(deg.)(°) 58.5 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.5 63.5 65.0

LB-708 H&FLaunching year 1995

LB-708 H&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

LB-606 H&FLaunching year 1995

LB-606 H&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

NEW LB-300Launching year 1995

NEW LB-300
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.5

NEW LB-280Launching year 1995

NEW LB-280
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 64.5

BIG-LBLaunching year 1995

BIG-LB
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 65.0

LB-727Launching year 1994

LB-727
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19 22 25 29 33 37 41 45 49 54 58
Lie angle(deg.)(°) 59.5 60.0 61.0 62.0 62.5 63.0 63.5 64.0 64.5 64.5 65.5

LB-717Launching year 1994

LB-717
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19 22 25 29 33 37 42 46 50 54 58
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 63.0 63.5 64.0 65.0 65.0 66.0

LB-708Launching year 1993

LB-708
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 64.0 64.5

LB-606Launching year 1993

LB-606
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated *Also handling Black barrel finish of the nickel material.
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 59.0 59.5 60.0 60.5 61.0 61.5 62.5 63.0 63.5 63.5 64.5

LB-300Launching year 1992

LB-300
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 58.5 59.0 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0 64.0

LB-280Launching year 1992

LB-280
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated *Also handling Black barrel finish of the nickel material.
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 17 20 23 27 30 34 38 42 46 50 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 65.0

LB-737Launching year 1992

LB-737
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19 22 25 29 33 37 42 46 50 54 58
Lie angle(deg.)(°) 58.5 59.0 59.5 60.0 60.5 61.0 62.0 62.5 63.5 63.5 64.0

TM-504 ARMRQ856Launching year 2005

Head material Mild steel
Head plating Satin Finish / 3-layer Plated
Shaft ARMRQ 856
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.25 2.75 2.75 3.50 3.75 4.25 4.25 4.75 5.25
Swing weight C9
Gross weight (g) 355 360 367 373 379 385 392 397 404 406
The above data are standard values for the ARMRQ 856 2S(R/39.0A)shaft.

MG-818 ARMRQ 851Launching year 2005

Head material Mild steel
Head plating Double-layer plating / Satin finish
Shaft ARMRQ 851
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 0.75 1.25 1.75 1.75 2.25 2.75 2.75 3.25 3.75 3.75
Swing weight C9
Gross weight (g) 345 350 356 362 369 375 382 388 394 395
The above data are standard values for the ARMRQ 851 3S(R/39.0A )shaft.

MG-818 MG143Launching year 2005

Head material Mild steel
Head plating Double-layer plating / Satin finish
Shaft MG-143
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 0.75 1.25 1.75 1.75 2.25 2.75 2.75 3.25 3.75 3.75
Swing weight C7
Gross weight (g) 345 352 357 363 368 374 381 389 393 395
The above data are standard values for the MG-143 (R/39.0A) shaft.

CN-808 ARMRQ856Launching year 2005

Head material Mild steel
Head plating Triple-layer plating / Satin finish
Shaft ARMRQ 856
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.0
Face progression(mm) 1.25 1.75 2.25 2.25 2.25 3.25 3.25 3.25 3.75 3.75
Swing weight C9
Gross weight (g) 355 361 367 371 378 384 390 397 405 406
The above data are standard values for the ARMRQ 856 2S(R/39.0A) shaft.

CN-808 CarboniumLaunching year 2005

Head material Mild steel
Head plating Triple-layer plating / Satin finish
Shaft Carbonium
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.0
Face progression(mm) 1.25 1.75 2.25 2.25 2.25 3.25 3.25 3.25 3.75 3.75
Swing weight C9
Gross weight (g) 347 352 357 362 368 376 381 388 393 396
The above data are standard values for the Carbonium 2S(R/39.0A) shaft.

AP-302 AC751Launching year 2005

Head material SUS630 titanium
Head plating Plating / Satin finish
Shaft AC-751
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 61.5 62.0 62.5 63.5 63.5 63.5
Face progression(mm) 0.75 2.25 2.75 2.75 2.75 3.75 3.75 3.75 4.75 4.75
Swing weight C8
Gross weight (g) 339 345 349 355 360 366 372 379 386 387
The above data are standard values for the AC-751 (R/39.0A) shaft.

TM-602 SK555Launching year 2005

Head material SUS630 Hollow epoxy resin containing
Head plating Double-layer plating / Satin finish
Shaft SK-555
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.0
Face progression(mm) 1.25 1.25 2.25 2.25 2.75 3.25 3.25 3.75 3.75 3.75
Swing weight C9
Gross weight (g) 350 355 361 366 371 377 383 389 397 399
The above data are standard values for the SK-555 (R/39.0A) shaft.

MA-601 Twin kick DORIC TITAN FW&FWLaunching year 2004

Head material SUS630
Head plating Double-layer plating / Satin finish
Shaft Twin kick DORIC TITAN FW&FW
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 0.25 0.25 1.25 1.25 1.75 2.25 2.25 2.75 2.75 3.75
Swing weight C7
Gross weight (g) 346 353 359 364 370 376 383 389 395 396
The above data are standard values for the Twin kick DORIC TITAN FW&FW 2S (R/39.0A) shaft.

AP-501 Twin kick DORIC FW&FWLaunching year 2004

Head material SUS630
Head plating Double-layer plating / Satin finish
Shaft Twin kick DORIC TITAN FW&FW
Flex R、S
#(No.) 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 64.0
Face progression(mm) 1.75 1.75 2.25 2.25 2.25 3.75 3.75 3.75 3.75 4.75
Swing weight C7
Gross weight (g) 349 353 358 365 372 378 383 390 396 399
The above data are standard values for the Twin kick DORIC TITAN FW&FW 2S (R/39.0A) shaft.

AP701 / NS PRO 950GHLaunching year 2003

AP701/NS PRO 950GH
Head material SUS630
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 - 64.0
Swing weight - D1 - D2
Gross weight (g) - 388 394 400 407 413 420 427 434 441 - 443
R

AP701 / AccelerateLaunching year 2003

AP701/Accelerate
Head material SUS630
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 - 64.0
Swing weight - C9 - D0
Gross weight (g) - 353 357 362 367 373 379 385 393 399 - 400
R

TM202 / NS PRO 950GHLaunching year 2003

TM202/NS PRO 950GH
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Swing weight - D1 - D2
Gross weight (g) - 388 394 400 407 414 421 428 435 441 - 443
R

TM202 / Accelerate F&FLaunching year 2003

TM202/AccelerateF&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Swing weight - C8 - C9
Gross weight (g) - 346 351 356 361 367 373 379 385 391 - 393
R

AP-301 MRS NS PRO 950GHLaunching year 2002

AP301/NS PRO 950GH
Head material SUS630 + Titanium face
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Length(inches) - 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Face progression(mm) - 0.25 0.75 1.25 1.75 1.75 2.75 2.75 2.75 3.25 - 3.75
Swing weight - D1 - D2
Gross weight (g) - 390 395 401 408 414 421 429 436 442 - 443
R

AP-301 MRS ACCELERATE ForceLaunching year 2002

AP301/Accelerate
Head material SUS630 + Titanium face
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Length(inches) - 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Face progression(mm) - 0.25 0.75 1.25 1.75 1.75 2.75 2.75 2.75 3.25 - 3.75
Swing weight - C9 - D0
Gross weight (g) - 353 358 363 369 375 380 386 392 398 - 400
R

AP-301 MRS ACCELERATE Force FW&FWLaunching year 2002

AP301/AccelerateF&F
Head material SUS630 + Titanium face
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Length(inches) - 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Face progression(mm) - 0.25 0.75 1.25 1.75 1.75 2.75 2.75 2.75 3.25 - 3.75
Swing weight - C8 - C9
Gross weight (g) - 346 351 355 361 368 373 379 386 391 - 394
R

TF201 / SK500Launching year 2001

TF201/SK500
Head material SUS630 + Titanium face
Head plating Satin Finish
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Swing weight - C7 - C8
Gross weight (g) - 347 351 356 361 367 373 379 385 392 - 393
R

MM45 888 / Accelerate F&FLaunching year 2001

MM45 888/Accelerate F&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Swing weight - C8 - C9
Gross weight (g) - 347 352 357 363 368 373 380 386 392 - 393
R

PROTUNE-NX / SUPER DORIC PROTUNELaunching year 2001

PROTUNE-NX/SUPER DORIC PROTUNE
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 18 21 24 27 31 35 39 43 47 52 - 56
Lie angle(deg.)(°) 59.0 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 - 64.0
Length(inches) 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Gross weight (g) 382 386 390 396 402 408 415 423 430 438 - 441
R

PROTUNE-SXLaunching year 2001

PROTUNE-SX
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 17 20 22 25 28 31 35 39 44 50 - 56
Lie angle(deg.)(°) 59.0 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5 64.0 - 64.0
Length(inches) 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Gross weight (g) 363 369 375 382 387 394 401 408 414 422 - 424
R

CROSSATTACK2Launching year 2000

CROSSATTACK2
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 17 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Length(inches) 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Gross weight (g)(R) 359 364 370 377 382 388 395 402 409 417 - 419

2000β / SUPER DORIC TitaniumⅠLaunching year 2000

2000β / SUPER DORIC TitaniumⅠ
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 17 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Length(inches) 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - 35.5
Gross weight (g) 357 361 365 372 377 385 390 397 404 411 - 413
R

CROSSATTACKLaunching year 2000

CROSSATTACK
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 17 19 21 24 27 30 34 38 42 46 50 53
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.0 64.0
Length(inches) 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.5 35.5
Gross weight (g) 351 357 363 368 374 380 387 393 400 410 412 413
R

2000-PRO1Launching year 2000

2000-PRO1
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 17 19 21 24 27 30 34 38 43 49 - 55
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Length(inches) 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 - 35.5
Gross weight (g) 352 357 362 367 374 380 387 393 401 409 - 412
R

F&FLaunching year 2000

F&F
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) - 19 21 24 27 30 34 38 43 49 - 56
Lie angle(deg.)(°) - 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 - 64.0
Length(inches) - 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 - 35.0
Gross weight (g) - 343 348 354 359 366 373 378 385 391 - 392
R

2000αLaunching year 1999

2000α
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 AW SW
Loft(deg.)(°) 17 19 21 24 27 30 34 38 42 46 50 53
Lie angle(deg.)(°) 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.0 64.0
Length(inches) 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.5 35.5
Gross weight (g) 345 350 354 361 368 374 380 386 394 403 405 407
R

TW717MLaunching year 2013

Head material / Manufacturing process Forged
Head plating Half miroor + Mirror Finish / Double-layer Painting
Shaft Dynamic Gold
# (No.) 3 4 5 6 7 8 9 10
Loft (deg.) 21.0 24.0 27.0 30.0 34.0 38.0 42.0 46.0
Lie angle (deg.) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0
Face progression(mm) 4.75 5.25 5.75
Distance to center of gravity (mm) 33.5 33.5 33.5 33.5 33.5 33.5 33.5 33.5
Height to Center of Gravity (mm) 19.5 19.5 19.5 20.5 20.5 21.0 21.0 21.5
Depth to center of gravity (mm) 3.6 3.4 3.2 3.0 2.8 2.6 2.0 1.8
Gravity Angle (deg.) - - 9.0 - - - - -
DG Length (inches) 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25
Swing weight R400 D1
S200 D2
Gross weight (g) R400 415 421 427 434 442 450 457 465
S200 420 426 432 439 447 455 462 470

TW717VLaunching year 2013

Head material / Manufacturing process Forged
Head plating Half miroor + Mirror Finish / Double-layer Painting
Shaft N.S.PRO MODUS3 TOUR120
# (No.) 3 4 5 6 7 8 9 10
Loft (deg.) 20.0 22.0 25.0 28.0 32.0 36.0 41.0 46.0
Lie angle (deg.) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0
Face progression(mm) 4.25 4.75
Distance to center of gravity (mm) 34.0 34.0 34.0 34.0 34.0 34.0 33.5 33.5
Height to Center of Gravity (mm) 18.0 18.0 18.5 18.5 19.0 19.5 20.0 20.0
Depth to center of gravity (mm) 3.6 3.6 3.3 3.3 3.0 2.6 2.2 2.0
Gravity Angle (deg.) - - 9.0 - - - - -
N.S.PRO MODUS3 TOUR120 Length (inches) 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25
Swing weight R D1
S D2
Gross weight (g) R 401 407 412 419 426 433 441 448
S 405 411 417 423 431 438 446 453

TW717PLaunching year 2013

Head material / Manufacturing process Forged
Face material Maraging stainless steel (face) : No.3~No.10
Head plating Double-layer plating / Satin finish + Painted finish
Shaft ARMRQ8 62,ARMRQ8 54
VIZARD I550,NS PRO950GH
# (No.) 3 4 5 6 7 8 9 10 11 SW
Loft (deg.) 19.0 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Lie angle (deg.) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.5
Face progression(mm) 3.55 3.75 4.00 4.25 4.55 4.75
Distance to center of gravity (mm) 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 33.0 33.0
Height to Center of Gravity (mm) 20.0 20.0 20.5 20.5 21.0 21.0 21.0 21.5 21.5 21.5
Depth to center of gravity (mm) 4.0 4.0 4.0 3.5 3.0 3.0 2.5 2.0 2.0 2.0
Gravity Angle (deg.) - - 11.5 - - - - - - -
ARMRQ8 62 Length (inches) 39.25 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.0 35.0
Swing weight R D0 D1
S D1 D2
Gross weight (g) R 360 366 372 378 384 391 399 406 416 418
S 365 371 377 383 389 396 404 411 421 423
ARMRQ8 54 Length (inches) 39.25 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.0 35.0
Swing weight R D0 D1
S D1 D2
Gross weight (g) R 355 360 366 372 379 386 392 399 409 412
S 360 365 371 377 384 391 397 404 414 417
VIZARD
I550
Length (inches) 39.25 38.75 38.25 37.75 37.25 36.75 36.25 35.75  35.0   35.0 
Swing weight R D0 D1
S D1 D2
Gross weight (g) R 355 361 368 374 380 386 393 400 409 412
S 360 366 373 379 385 391 398 405 414 417
NS PRO950GH Length (inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Swing weight R D1 D2
S D2 D3
Gross weight (g) R 390 396 402 408 414 421 428 435 442 444
S 395 401 407 413 419 426 433 440 447 449

904 ARMRQ 864, NS PRO950GHLaunching year 2005

Head material Mild steel
Head plating Triple-layer plating / Satin finish
Shaft ARMRQ 864、NS PRO950GH
Flex R、S
#(No.) 3 4 5 6 7 8 9 10
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5
Lie angle(deg.)(°) 59.0 59.5 60.0 60.8 61.5 62.3 63.0 63.5
Face progression(mm) 3.25 3.25 3.75 3.75 3.75 4.25 4.25 4.25
Swing weight C9
Gross weight (g)
ARMRQ 864
360 367 371 377 382 388 395 401
Gross weight (g)
NS PRO950GH
388 395 402 408 414 422 429 436
The above data are standard values for the ARMRQ 864, NS PRO950GH (R/39.0A) shaft.

PF ARMRQ 864, NS PRO950GHLaunching year 2005

Head material SUS630
Head plating Triple-layer plating / Satin finish
Shaft ARMRQ 864、NS PRO950GH
Flex R、S
#(No.) 3 4 5 6 7 8 9 10
Loft(deg.)(°) 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5
Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5
Lie angle(deg.)(°) 58.7 59.4 60.1 60.7 61.4 62.1 62.8 63.5
Face progression(mm) 3.25 3.25 3.75 3.75 3.75 3.75 3.75 3.75
Swing weight C9
Gross weight (g)
ARMRQ 864
360 365 371 376 382 389 395 401
Gross weight (g)
NS PRO950GH
387 393 399 405 412 419 426 433
The above data are standard values for the ARMRQ 864, NS PRO950GH (R/39.0A) shaft.

Tour WorldP / NS950GHLaunching year 2003

Tour WorldP/NS950GH
Head material SUS630
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5 52.0 56.0
Lie angle(deg.)(°) 58.0 58.7 59.4 60.1 60.7 61.4 62.1 62.8 63.5 63.5 63.5
Swing weight D1 D2
Gross weight (g) 386 391 397 403 409 416 422 429 437 444 445
R

Tour World P/TD965Launching year 2003

Tour WorldP/TD965
Head material SUS630
Head plating Satin Finish 2-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5 52.0 56.0
Lie angle(deg.)(°) 58.0 59.0 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0 63.5
Swing weight C9 D0
Gross weight (g) 362 366 371 378 384 390 396 403 410 417 420
R

Tour Athlete 925/DGLaunching year 2003

Tour Athlete 925/DG
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
#(No.) 2 3 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 19.0 21.0 23.5 26.5 30.0 33.5 37.5 42.0 46.5 - -
Lie angle(deg.)(°) 58.5 59.1 59.8 60.2 60.8 61.5 62.3 63.0 63.5 - -
Swing weight D1 -
Gross weight (g) 407 415 420 427 434 440 448 455 462 - -
R

HT-01GLaunching year 2011

HT-01G
Head material / Manufacturing process (Body) SUS630 / Casting (Face) Maraging Stainless Steel
Head Finish Satin Finish / 2-layer Plated+Plated Finish(Silver)
Number #4 #5 #6 #7 #8 #9 #10 #11 SW
Length(inch) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Loft (deg.) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Lie angle (deg.) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face Progression (mm) 2.25 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.25
Swing Weight C9 (R) / D0 (S) D0(R)/
D1(S)
Total Weight (g) 348 353 358 365 371 377 384 391 392
2S

HT-01Launching year 2009

HT-01
Head material / Manufacturing process (Body) SUS630 / Casting (Face) ES230 / Forged
Head plating Satin Finish / 2-Layer Plated
Shaft HT-55
Flex R,S
#(No.) 4 5 6 7 8 9 10 11 SW
Loft(deg.)(°) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length(inches) 38.5 =#4
Lie angle(deg.)(°) 60.5 61.0 61.5 62.0 62.5 63.0 63.0 63.0 64.0
Face progression(mm) 2.25 2.25 2.75 3.25 3.25 3.25 3.75 4.25 4.75
Swing weight C-9 C-9 C-9 C-9 C-9 C-9 C-9 C-9 D-0
Gross weight (g) 355 362 368 375 381 389 395 401 402
2S / R

Youth golferLaunching year 2011

No. / Loft (deg.) 7/38 9/46 SW/54
Head material / Manufacturing process SUS630 / Casting
Shaft Carbon
Length (inches) 29.0 28.0 27.0
Total weight (g) 288 300 319
Youth golfer: Height 120 cm ~
* Total weight is an estimate.

KidsLaunching year 2011

No. / Loft (deg.) 7/38 SW/54
Head material / Manufacturing process SUS630 / Casting
Shaft Glass + Carbon
Length (inches) 26.0 25.0
Total weight (g) 305 337
Kids golfer: Height 100 cm~
* Total weight is an estimate.

55th Anniversary Model 5StarsLaunching year 2012

Head material Body : SUS630 / Face :Maraging stainless copper
Manufacturing process Body : Casting / Face : Forged
Head plating Satin 2-layer plating
Shaft ARMRQ 55th 5S
Flex R / S
# (No.) 5 6 7 8 9 10 11 AW SW
Loft (deg.) 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length (inches) 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.5
Face progression (mm) 2.25 2.75 2.75 3.25 3.25 3.75 3.75 4.25 4.25
Head length (mm) 100.0 100.0 100.0 99.0 99.0 99.0 98.0 98.0 98.0
Face height (mm) 48.0 49.0 50.0 51.0 52.0 53.0 54.0 54.5 55.0
Head weight (g) 255 262 268 275 281 289 296 296 298
Swing weight R C9 C9 C9 C9 C9 C9 C9 C9 D0
S D0 D0 D0 D0 D0 D0 D0 D0 D1
Gross weight (g) R 363 369 376 382 389 395 403 403 405
S 367 373 380 386 393 399 407 407 409
Distance to center of gravity (mm) 36.0 36.0 36.0 36.0 36.0 35.0 35.0 35.0 34.0
Height to center of gravity (mm) 19.0 19.0 19.0 20.0 20.0 21.0 21.0 22.0 22.0
Depth to center of gravity (mm) 6.1 5.7 5.3 5.0 4.7 4.3 4.0 3.7 3.7

55th Anniversary Model 3StarsLaunching year 2012

Head material Body : SUS630 / Face :Maraging stainless copper
Manufacturing process Body : Casting / Face : Forged
Head plating Satin 2-layer plating
Shaft ARMRQ 55th 3S
Flex R / S
# (No.) 5 6 7 8 9 10 11 AW SW
Loft (deg.) 22.5 25.5 28.5 32.5 36.5 41.5 46.5 51.5 56.0
Length (inches) 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.0 63.5
Face progression (mm) 2.25 2.75 2.75 3.25 3.25 3.75 3.75 4.25 4.25
Head length (mm) 100.0 100.0 100.0 99.0 99.0 99.0 98.0 98.0 98.0
Face height (mm) 48.0 49.0 50.0 51.0 52.0 53.0 54.0 54.5 55.0
Head weight (g) 255 262 268 275 281 289 296 296 298
Swing weight R C9 C9 C9 C9 C9 C9 C9 C9 D0
S D0 D0 D0 D0 D0 D0 D0 D0 D1
Gross weight (g) R 363 369 376 382 389 395 403 403 405
S 367 373 380 386 393 399 407 407 409
Distance to center of gravity (mm) 36.0 36.0 36.0 36.0 36.0 35.0 35.0 35.0 34.0
Height to center of gravity (mm) 19.0 19.0 19.0 20.0 20.0 21.0 21.0 22.0 22.0
Depth to center of gravity (mm) 6.1 5.7 5.3 5.0 4.7 4.3 4.0 3.7 3.7

G1X IRONLaunching year 2014

Head material /
manufacturing process
SUS630 / Casting
Face material /
manufacturing process
Half mirror + Blast finish + Double-layer painting finish
Shaft XP95,G1X-700,G1X-500
# (No.) 4 5 6 7 8 9 P A S
Loft(deg.) 21.0 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Lie angle(deg.) 61.0 61.5 62.0 62.5 63.0 63.5 64.0 64.0 64.0
Face progression(mm) 3.6 3.8 4.0 4.0 4.3 4.3 4.3 4.6 4.8
Distance to Center of Gravity(mm) 37.0 37.0 37.0 37.0 37.0 37.0 37.0 35.5 34.5
Height to Center of Gravity(mm) 19.0 20.0 20.0 20.0 20.0 20.0 21.0 22.0 22.0
Depth to center of gravity(mm) 5.5 5.5 5.0 5.0 4.0 4.0 3.5 2.5 2.0
Gravity Angle(deg.) - 10.5 - - - - - - -
XP95 Length(inches) 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.0 35.0
Swing weight・
Gross weight(g)
R300 D2 D3
397 404 410 416 422 429 438 444 445
S300 D2 D3
399 406 412 418 424 431 440 446 447
G1X-700 Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.5
Swing weight・
Gross weight(g)
R D1 D2
373 378 383 389 394 401 408 416 418
S D1 D2
375 380 385 391 396 403 410 418 420
G1X-500 Length(inches) 39.0 38.5 38.0 37.5 37.0 36.5 36.0 35.5 35.5
Swing weight・
Gross weight(g)
R D1 D2
355 360 365 371 375 382 389 397 399
S D1 D2
357 362 367 373 377 384 391 399 401

TW-ULaunching year 2013

Head material / manufacturing process MS225 / casting
Face material / manufacturing process Maraging stainless steel / rolled
Plating Double-layer plating / Satin finish
Shaft NS PRO950GH
# (No.) #2 #3 #4
Loft(deg.) 18 21 24
Lie angle(deg.) 59.0 59.5 60.0
Length(inches) NS PRO950GH 39.25 38.75 38.25
Distance to center of gravity(mm) 35.0 35.0 35.0
Height to Center of Gravity(mm) 19.0 19.0 19.0
Depth to center of gravity(mm) 6.0 6.0 6.0
Gravity Angle(deg.) 12.0 12.5 13.0
Swing weight・
Gross weight(g)
NS PRO950GH D3 392 D3 398 D3 403

TW717 UTLaunching year 2013

Head material / Manufacturing process SUS630/Casting
Face material High-Strength Customed Steel
Shaft ARMRQ8 62,ARMRQ8 54
VIZARD UT950,UT850,UT650,UT550
NS PRO950GH
# (No.) 16 19 22
Loft (deg.) 16 19 22
Lie angle (deg.) 59.0 59.0 59.0
Length (inches) VIZARD 40.5 40.0 39.5
NS PRO950GH 40.0 39.5 39.0
ARMRQ 40.5 40.0 39.5
Distance to center of gravity (mm) 32.5 33.0 33.5
Height to Center of Gravity (mm) 19.0 19.5 20.5
Depth to center of gravity (mm) 25.0 25.0 25.5
Gravity Angle (deg.) 17.0 17.0 17.5
Swing weight・
Gross weight (g)
ARMRQ8 62 R D0 344 D0 348 D0 352
S D1 349 D1 353 D1 357
ARMRQ8 54 R D0 337 D0 341 D0 345
S D1 342 D1 346 D1 350
UT950 D3 378 D3 382 D3 386
UT850 D2 368 D2 372 D2 376
UT650 D2 351 D2 355 D2 359
UT550 D1 341 D1 345 D1 349
NS PRO950GH S D2 384 D2 388 D2 392

U-03 Left HandedLaunching year 2014

U-03 Left Handed
Head material/Manufacturing process SUS630 / Forged
Face material High-strength Custom Steel
Shaft ARMRQ8 54, ARMRQ8 49,ARMRQ8 45
# (No.) U-22
Length(inches) 40.0
Loft (deg.) 22
Head volume(cm3 136
Lie angle (deg.) 60.0
Distance to center of gravity (mm) 32.5
Height to Center of Gravity (mm) 22.0
Length of Hitting Point(mm) 12.5
Depth to center of gravity (mm) 26.5
Gravity Angle(deg.) 20.5
Swing weight・Gross weight (g) ARMRQ8 49 R D0・321
SR D1・324
S D1・325
ARMRQ8 54 R D0・332
S D1・336
ARMRQ8 45 R C7・311
Data refers to the 2S grade

U-03Launching year 2014

U-03
Head material/Manufacturing process SUS630 / Forged
Face material High-strength Custom Steel
Shaft ARMRQ8 54(U-19・U-22・U-25 only)
# (No.) U-19 U-22 U-25 U-28
Length(inches) 40.5 40.0 39.5 39.0
Loft (deg.) 19 22 25 28
Head volume(cm3 137 136 133 131
Lie angle (deg.) 60.0 60.0 60.0 60.0
Distance to center of gravity (mm) 32.0 32.5 33.0 33.5
Height to Center of Gravity (mm) 21.5 22.0 23.0 23.5
Length of Hitting Point(mm) 13.0 12.5 11.5 11.0
Depth to center of gravity (mm) 25.5 26.5 27.0 27.5
Gravity Angle(deg.) 21.0 20.5 19.0 18.0
Swing weight・Gross weight (g) ARMRQ8 49 R D0・317 D0・321 D0・325 D0・329
SR D1・320 D1・324 D1・328 D1・332
S D1・321 D1・325 D1・329 D1・333
ARMRQ8 54 R D0・328 D0・332 D0・336 -
S D1・332 D1・336 D1・340 -
ARMRQ8 45 R C7・307 C7・311 C7・315 C7・319
Data refers to the 2S grade

U-01Launching year 2011

U-01
Head material / Manufacturing process SUS630 / Casting
Face Material / Manufacturing process High-strength Custom Steel / Rolling
Shaft ARMRQ6 49,ARMRQ6 62,ARMRQ6 54,ARMRQ6 45
Flex R,S
#(No.) U-18 U-21 U-24
Loft(deg.)(°) 18 21 24
Length(inches) 40.5 40.0 39.5
Swing weight D0
Gross weight (g) 319 323 327
ARMRQ6 49 2S grade / R

MG612Launching year 2008

MG612
Head material / Manufacturing process SUS630 / Casting
Face Material / Manufacturing process High-strength Custom Steel / Rolling
Shaft ARMRQ UD45
Flex R
#(No.) U-20 U-23 U-26
Loft(deg.)(°) 20 23 26
Length(inches) 40.50 40.00 39.50
Lie angle(deg.)(°) 60.5 60.5 60.5
Swing weight C6
Gross weight (g) 307 311 314
In the case of 2S grade / R

U-202Launching year 2008

U-202
Head material / Manufacturing process SUS630 / Casting
Face Material / Manufacturing process High-strength Custom Steel / Rolling
Standard featureShaft ARMRQ UD49 / ARMRQ UD62 / ARMRQ UD54 / ARMRQ UD45
Flex R
#(No.) U-19 U-22 U-25
Loft(deg.)(°) 19 22 25
Length(inches) 40.5 40.0 39.5
Lie angle(deg.)(°) 60.0 60.0 60.0
Swing weight D0
Gross weight (g) 317 321 325
ARMRQ UD49 In the case of 2S grade / R

U-201Launching year 2008

U-201
Head material / Manufacturing process Strong steel + Tungsten
Head plating Crystal Black Pearl
Shaft ARMRQ B62 / ARMRQ B54 / ARMRQ B49 / ARMRQ B45
Flex R,S
#(No.) 19 22 25
Loft(deg.)(°) 19.0 22.0 25.0
Length(inches) 40.5 40.0 39.5
Lie angle(deg.)(°) 59.5 59.5 59.5
Swing weight C9
Gross weight (g) 345 350 355
ARMRQ B49 In the case of 2S grade / R

ATHPORT Ⅲ e+Launching year 2010

ATHPORT Ⅲ e+
Head material / Manufacturing process SUS630 / Casting
Crown Material / Manufacturing process SUS630 / Rolling
Shaft ATHPORTⅢ +ARMRQ 53
Flex R,S
#(No.) U-18 U-21 U-24
Loft(deg.)(°) 18 21 24
Length(inches) 40.5 40.0 39.5
Lie angle(deg.)(°) 61.0 61.0 61.5
Swing weight D0
Gross weight (g) 330 334 339
R

ATHPORTLaunching year 2009

ATHPORT HONMA
Head material / Manufacturing process SUS630 / Casting
Crown Material / Manufacturing process SUS630 / Rolling
Shaft +ARMRQ 62
Flex R,S
#(No.) U-19 U-22 U-25
Loft(deg.)(°) 19 22 25
Length(inches) 40.5 40.0 39.5
Lie angle(deg.)(°) 61.0 61.0 61.5
Swing weight D0
Gross weight (g) 346 350 354
R

ATHPORT e+Launching year 2009

ATHPORT e+ HONMA
Head material / Manufacturing process SUS630 / Casting
Crown Material / Manufacturing process SUS630 / Rolling
Shaft +ARMRQ 53
Flex R,S
#(No.) U-19 U-22 U-25
Loft(deg.)(°) 19 22 25
Length(inches) 40.5 40.0 39.5
Lie angle(deg.)(°) 61.0 61.0 61.5
Swing weight D0
Gross weight (g) 330 334 338
R

DUALATTACK ⅡLaunching year 2002

DUALATTACK 2
Head material Strong steel
Head plating Pearl Dark Blue
Shaft SK500 Carbon
Flex R,S
#(No.) U-17 U-19 U-21 U-23 U-25
Loft(deg.)(°) 17 19 21 23 25
Length(inches) 41.5 41.0 40.5 40.0 40.0
Head volume(cm3 140 135 135 132 130
Face Thickness(mm) 33.0 33.0 33.0 33.0 32.5
Lie angle(deg.)(°) 58.0 58.5 58.5 58.5 58.5
Swing weight C8
Gross weight (g) 318 322 325 330 331
R

DUALATTACK F&FLaunching year 2001

DUALATTACK F&F
Head material Strong steel
Shaft DORIC TITAN FEATHER&FEATHER
Flex R,S
#(No.) U-15 U-17 U-19 U-21 U-23
Loft(deg.)(°) 15 17 19 21 23
Length(inches) 42.0 41.5 41.0 40.5 40.0
Lie angle(deg.)(°) 58.0 58.5 58.5 58.5 58.5
Swing weight C8
Gross weight (g) 298 301 304 307 310
R

DUALATTACKLaunching year 2000

DUALATTACK
Head material Strong steel
Shaft DORIC TITAN I・DORIC TITAN Feather Weight Ⅲ
Flex R-2,R,S
#(No.) U-13 U-15 U-17 U-19 U-21 U-23
Loft(deg.)(°) 13 15 17 19 21 23
Length(inches) 42.5 42.0 41.5 41.0 40.5 40.0
Lie angle(deg.)(°) 58.0 58.0 58.5 58.5 58.5 58.5
Swing weight D0
Gross weight (g) 312 316 320 324 328 332
R

U-03 LadiesLaunching year 2014

U-03 Ladies
Head material/Manufacturing process SUS630 / Forged
Face material High-strength Custom Steel
Shaft ARMRQ8 40
# (No.) U-19 U-22 U-25 U-28
Length(inches) 39.5 39.0 38.5 38.0
Loft (deg.) 19 22 25 28
Head volume(cm3 137 136 133 131
Lie angle (deg.) 60.0 60.0 60.0 60.0
Distance to center of gravity (mm) 32.0 32.5 33.0 33.5
Height to Center of Gravity(mm) 21.5 22.0 23.0 23.5
Length of Hitting Point(mm) 13.0 12.5 11.5 11.0
Depth to Center of Gravity(mm) 25.5 26.5 27.0 27.5
Gravity Angle(deg.) 21.0 20.5 19.0 18.0
Swing weight・Gross weight (g) ARMRQ8 40 L C1・295 C1・299 C1・303 C1・307
Data refers to the 2S grade

TW717 UT LadiesLaunching year 2013

Head material / Manufacturing process SUS630/Casting
Face material High-Strength Customed Steel
Shaft ARMRQ8 45,VIZARD UT500
# (No.) U/22 U/25 U/28
Length (inches) 39.0 38.5 38.0
Loft (deg.) 22 25 28
Lie angle (deg.) 59.5 59.5 59.5
Height to Center of Gravity (mm) 21.5 21.5 21.5
Distance to center of gravity (mm) 33.0 33.5 34.0
Depth to center of gravity (mm) 25.5 27.5 28.0
Gravity Angle (deg.) 18.0 18.0 18.0
Swing weight・
Gross weight (g)
ARMRQ8 45 L C6 315 C6 319 C6 323
UT500 C7 317 C7 321 C7 325

U-01 LadiesLaunching year 2011

U-01 Ladies
Head material / Manufacturing process SUS630 / Casting
Face Material / Manufacturing process High-strength Custom Steel/Rolling
Shaft ARMRQ6 40
Flex L
#(No.) U-18 U-21 U-24
Loft(deg.)(°) 18 21 24
Length(inches) 39.5 39.0 38.5
Lie angle(deg.)(°) 60.5 60.5 60.5
Swing weight C1
Gross weight (g) 296 300 304
2S / L

ATHPORT Ⅲ e+ LadiesLaunching year 2010(H.22)

ATHPORT Ⅲ e+ Ladies
Head material / Manufacturing process SUS630 / Casting
Crown Material / Manufacturing process SUS630 / Rolling
Shaft ATHPORTⅢ +ARMRQ 45
Flex L
#(No.) U-18 U-21 U-24
Loft(deg.)(°) 18 21 24
Length(inches) 39.5 39.0 38.50
Lie angle(deg.)(°) 61.0 61.0 61.5
Swing weight C6
Gross weight (g) 310 314 319
L

ATHPORT e+ LadiesLaunching year 2009

ATHPORT e+ HONMA Ladies
Head material / Manufacturing process SUS630 / Casting
Crown Material / Manufacturing process SUS630 / Rolling
Shaft +ARMRQ 45
Flex L
#(No.) U-19 U-22 U-25
Loft(deg.)(°) 19 22 25
Length(inches) 39.5 39.0 38.5
Lie angle(deg.)(°) 61.0 61.0 61.5
Swing weight C6
Gross weight (g) 311 315 319
L

ML512Launching year 2008

ML512
Head material / Manufacturing process SUS630/Casting
Face Material / Manufacturing process High-strength Custom Steel/Rolling
Shaft ARMRQ UD40
Flex L
#(No.) U-20 U-23 U-26
Loft(deg.)(°) 20 23 26
Length(inches) 39.50 39.00 38.50
Lie angle(deg.)(°) 61.0 61.0 61.0
Swing weight C0
Gross weight (g) 295 299 304
In the case of 2S grade / L

55th Anniversary Model 5StarsLaunching year 2012

Head material Body : SUS630 / Face :High strength custom steel
Manufacturing process Body : Casting / Face :Steel rolling
Shaft ARMRQ 55th 5S
Flex R / S
Loft (deg.) 22
Length (inches) 40.0
Head volume (cm3) 126
Lie angle (deg.) 60.0
Face progression (mm) 16.0
Swing weight R D0
S D1
Gross weight (g) R 324
S 327
Distance to center of gravity (mm) 34.0
Height to center of gravity (mm) 22.5
Depth to center of gravity (mm) 26.5

55th Anniversary Model 3StarsLaunching year 2012

Head material Body : SUS630 / Face :High strength custom steel
Manufacturing process Body : Casting / Face :Steel rolling
Shaft ARMRQ 55th 3S
Flex R / S
Loft (deg.) 22
Length (inches) 40.0
Head volume (cm3) 126
Lie angle (deg.) 60.0
Face progression (mm) 16.0
Swing weight R D0
S D1
Gross weight (g) R 324
S 327
Distance to center of gravity (mm) 34.0
Height to center of gravity (mm) 22.5
Depth to center of gravity (mm) 26.5

Perfect Switch UTILITYLaunching year 2011

Head material / Manufacturing process SUS630/Casting
Face material High-strength Custom Steel
Loft (deg.) 19 22 25
Lie angle(deg.) 59.5
Length (inches) 40.5 40.0 39.5
ARMRQ6 Perfect Switch
3S Shaft
Swing weight R D0
S D1
Gross weight(g) R 335 339 343
S 338 342 346

G1X UTILITYLaunching year 2014

Head material / manufacturing process SUS630 / Casting
Face material / manufacturing process High-strength custom steel / Rolled
Shaft G1X-700,G1X-500
# (No.) 19 22 25
Loft(deg.) 19 22 25
Lie angle(deg.) 59.5 59.5 59.5
Length(inches) 41.0 40.5 40.0
Distance to Center of Gravity(mm) 33.0 33.0 33.0
Height to Center of Gravity(mm) 19.5 20.5 21.5
Depth to center of gravity(mm) 25.0 25.5 26.0
Gravity Angle(deg.) 14.0 14.0 14.0
Swing weight・ Gross weight(g) G1X-700 R D3
355 359 363
S D3
357 361 365
G1X-500 R D3
335 339 343
S D3
337 341 345

W-105cLaunching year 2012

W-105c
Head material /
Manufacturing process
Mild Steel / Casting
Head plating Black Nickel finish + Chrome Satin Finish
Shaft NS PRO 950GH / Dynamic Gold
Flex R,S
#(No.) 48 50 52 54 56-9 56-12 58-9 58-12 60-9 63-9
Loft (deg.) 48.0 50.0 52.0 54.0 56.0 56.0 58.0 58.0 60.0 63.0
Length (inches) 35.0
Lie angle (deg.) 63.5
Face progression (mm) 6.0 6.0 6.0 6.5 6.5 5.5 6.5 5.5 6.5 6.5
Bounce (deg.) 8.0 8.0 8.0 9.0 9.0 12.0 9.0 12.0 9.0 9.0
Distance to center of gravity (mm) 35.0 35.0 35.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0
Height to Center of Gravity (mm) 23.0 23.0 24.0 24.0 24.0 23.0 23.0 23.0 23.0 24.0
NS PRO 950GH Swing weight R D1 D2
S D2 D3
Gross
weight (g)
R 442 445
S 445 448
Dynamic Gold Swing weight R400 D1 D2
S200 D2 D3
Gross
weight (g)
R400 468 471
S200 471 474
R

W-105pLaunching year 2012

W-105P
Head material /
Manufacturing process
Mild Steel / Casting
Head plating Chrome finish + Satin finish
Shaft NS PRO 950GH / Dynamic Gold
Flex R,S
#(No.) 48 50 52 54 56-9 56-12 58-9 58-12 60-9 63-9
Loft (deg.) 48.0 50.0 52.0 54.0 56.0 56.0 58.0 58.0 60.0 63.0
Length (inches) 35.0
Lie angle (deg.) 63.5
Face progression (mm) 6.0 6.0 6.0 6.5 6.5 5.5 6.5 5.5 6.5 6.5
Bounce (deg.) 8.0 8.0 8.0 9.0 9.0 12.0 9.0 12.0 9.0 9.0
Distance to center of gravity (mm) 35.0 35.0 35.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0
Height to Center of Gravity (mm) 23.0 23.0 24.0 24.0 24.0 23.0 23.0 23.0 23.0 24.0
NS PRO 950GH Swing weight R D1 D2
S D2 D3
Gross
weight (g)
R 442 445
S 445 448
Dynamic Gold Swing weight R400 D1 D2
S200 D2 D3
Gross
weight (g)
R400 468 471
S200 471 474
R

W-103Launching year 2011

W-103
Head material / Manufacturing process Mild steel / Casting
Head plating Double nickel finish
Shaft NS PRO 950GH, ARMRQ6 62,ARMRQ6 54,ARMRQ6 49,ARMRQ6 45
Flex R,S
#(No.) 48 50 53 56-9 56-12 58-9 58-12 60-9 63-9
Loft(deg.)(°) 48.0 50.0 53.0 56.0 56.0 58.0 58.0 60.0 63.0
Bounce(deg.)(°) 8.0 8.0 9.0 9.0 12.0 9.0 12.0 9.0 9.0
Length(inches) 35.0
Lie angle(deg.)(°) 63.5
Face progression(mm) 5.75 5.75 5.75 6.25 6.25 6.25 6.25 6.25 6.25
Swing weight D1
Gross weight (g) 442
R

W-201Launching year 2009

W-201
Head material / Manufacturing process Mild Steel / Casting
Head plating Black nickel + Chrome finish / Satin Finish
Shaft NS PRO 950GH
Flex R,S
#(No.) 50 53 56 58
Loft(deg.)(°) 50.0 53.0 56.0 58.0
Bounce(deg.)(°) 8.0 9.0 12.0 12.0
Length(inches) 35.0
Lie angle(deg.)(°) 63.5
Face progression(mm) 4.25 4.25 4.75 4.75
Swing weight D1
Gross weight (g) 439
R

W-102Launching year 2009

W-102
Head material / Manufacturing process Mild Steel/Casting
Head plating Black nickel + Chrome finish / Satin Finish
Shaft NS PRO 950GH
Flex R,S
#(No.) 50-8 53-8 56-9 56-14 58-9 58-14 60-9
Loft(deg.)(°) 50.0 53.0 56.0 56.0 58.0 58.0 60.0
Bounce(deg.)(°) 8.0 8.0 9.0 14.0 9.0 14.0 9.0
Length(inches) 35.0
Lie angle(deg.)(°) 63.5
Face progression(mm) 5.75 5.75 5.75 6.75 6.75 6.75 6.75
Swing weight D1
Gross weight (g) 440
R

Sand wedge Classic Ⅱ

Sand wedge Classic Ⅱ
Loft(deg.)(°) 56
Lie angle(deg.)(°) 64.0

Sand wedge Classic

Sand wedge Classic
Loft(deg.)(°) 60
Lie angle(deg.)(°) 66.0

Sand wedge M-30

Sand wedge M-30
Loft(deg.)(°) 56
Lie angle(deg.)(°) 65.5

Sand wedge M-20

Sand wedge M-20
Loft(deg.)(°) 58
Lie angle(deg.)(°) 65.5

Sand wedge FE-4000

Sand wedge FE-4400
Loft(deg.)(°) 58
Lie angle(deg.)(°) 66.0

Sand wedge FE-2200

Sand wedge FE-2200
Loft(deg.)(°) 56
Lie angle(deg.)(°) 64.0

Sand wedge PP-105

Sand wedge PP-105
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Loft(deg.)(°) 58
Lie angle(deg.)(°) 65.0

Approach wedge PP-105

Approach wedge PP-105
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Loft(deg.)(°) 54
Lie angle(deg.)(°) 65.0

Sand wedge PP-103

Sand wedge PP-103
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Loft(deg.)(°) 58
Lie angle(deg.)(°) 65.0

Sand wedge PP-102

Sand wedge PP-102
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Loft(deg.)(°) 58
Lie angle(deg.)(°) 65.5

Sand wedge PP-101

Sand wedge PP-101
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Loft(deg.)(°) 58
Lie angle(deg.)(°) 66.0

Approach wedge PP-101

Approach wedge PP-101
Head material Mild Steel
Head plating Satin Finish / 3-layer Plated
Loft(deg.)(°) 54
Lie angle(deg.)(°) 65.5

PP-102Launching year 2013

PP-102
Head material Soft iron (body) + Soft stainless steel SUS304 (face) + Tungsten (sole)
Manufacturing process CNC Milled Soft Iron
Finish Gloss Nickel Platinum-Colored Finished
Shaft Original Steel
Length 34 Inches

PP-101Launching year 2013

PP-101
Head material Soft iron (body) + Soft stainless steel SUS304 (face) + Tungsten (sole)
Manufacturing process CNC Milled Soft Iron
Finish Gloss Nickel Platinum-Colored Finished
Shaft Original Steel
Length 34 Inches

BP PutterLaunching year 2012

BP Putter
Head (body) material SUS 630
Head (body) manufacturing method Casting
Shaft HP-D7N PHP-D7N
Model BP-2001 BP-2002 BP-2003 BP-2005 BP-2006 BP-2007
Lie Angle 72° 71°
Loft Angle
Length(inches) 34
Total Weight Chrome plated 535g 541g 542g 540g
Nickel plated 531g 537g 538g 536g

BH PutterLaunching year 2011

BH Putter
Head material SUS630 & Aluminum (body) + Stainless steel SUS304 (face)
Manufacturing process Casting + CNC Processing
Shaft PHP72 Shaft
Finish Black nickel + Black alumite
Length 34.0

PP-002Launching year 2009

PP-002
Head material Mild Steel(body)+Soft Stainless SUS304(face)
Head manufacturing process FE Forged Milled
Plating Full Gold Plated Finish , Gloss Nickel Platinum-Colored Finish
Gloss Nickel Black Finish.
Shaft HP-72 Pendulum Ⅱ Steel
Length 34

PP-001Launching year 2009

PP-001
Head material Mild Steel(body)+Soft Stainless SUS304(face)
Head manufacturing process FE Forged Milled
Plating Full Gold Plated Finish , Gloss Nickel Platinum-Colored Finish
Gloss Nickel Black Finish.
Shaft HP-72 Pendulum Ⅱ Steel
Length 34

BP PutterLaunching year 2008

BP Putter
Head material SUS630 Body+ Stainless steel SUS304 (face)
Head manufacturing process Casting
Plating Chrome finish + Matte black paint finish
Model BP-1008 BP-1009 BP-1010 BP-1011 BP-1012 BP-1013 BP-1014
Shaft HP-72 HP-72 HP-72, PendulumⅡ HP-72, PendulumⅡ HP-72, PendulumⅡ HP-72 HP-72, PendulumⅡ
Length 34inch

BP Putter for LeftyLaunching year 2008

BP Putter for Lefty
Head material SUS630 Body+ Stainless steel SUS304 (face)
Head manufacturing process Casting
Plating Chrome finish + Matte black paint finish
Model BP-1015
Shaft HP-72, PendulumⅡ
Length 34inch

HP PutterLaunching year 2014

HP Putter1000
Head (body) material Body:SUS630, TPU + Stainless / TPU
Head (body) manufacturing method Body:Casting
Finish Black Nickel Painting / Nickel Painting
Shaft HP-D7N PHP-D7N HP-D7N PHP-D7N
Model HP-1001 HP-1002 HP-1003 HP-1005 HP-1006 HP-1007 HP-1008
Lie Angle 72° 71° 72°
Loft Angle
Length(inches) 34
Total Weight 542g 544g 543g 561g 546g 548g 545g

Youth golferLaunching year 2011

No. / Loft (deg.) PT
Head material / Manufacturing process SUS630 / Casting
Shaft Steel
Length (inches) 26.5
Youth golfer: Height 120 cm ~

KidsLaunching year 2011

No. / Loft (deg.) PT
Head material / Manufacturing process SUS630 / Casting
Shaft Steel
Length (inches) 24.5
Kids golfer: Height 100 cm~

55th Anniversary Model 5StarsLaunching year 2012

Head material S25C
Manufacturing process Casting and grinding
Shaft ARMRQ 55th 5S
Length (inches) 34.0
Loft (deg.) 2.0
Lie angle (deg.) 70.0
Head weight (g) 348.0

55th Anniversary Model 3StarsLaunching year 2012

Head material S25C
Manufacturing process Casting and grinding
Shaft ARMRQ 55th 3S
Length (inches) 34.0
Loft (deg.) 2.0
Lie angle (deg.) 70.0
Head weight (g) 348.0