TOUR WORLD TW-U ユーティリティ:プロも実戦で使用の


These clubs use ES230 maraging steel with high strength and high repulsion for the face. The face is edge-welded to the body, making it possible to achieve higher resiliency and longer distances.

We've added weight to the hollow toe and optimized its weight distribution with the hosel, resulting in high moment of inertia around the neck and achieving the head tracking performance that pros demand.

1These clubs offer an even lower and deeper center of gravity by adding of 10-g tungsten screw to the body designed with a wide sole and low center of gravity, giving pros the trajectory control they desire.

The subtle height difference between the toe and heel gives you the feel of hugging the ball, making it easier to maintain a straight line to the target.
The stylish goose shape and delicately shaped round sole let you visualize the ease of grabbing and carrying the ball, and let you reach the green accurately even at long range. These blades carefully designed by our craftsmen, match the wide-sole structure that most advanced golfers trying to avoid, are beautiful in shape and easy to use, providing an overall head shape that pros prefer.

A wide sole for better swing-through Face chamfering.

Intended to provide both easy hit and good swing , with a sole design.
That lets you keep the face oriented in the direction you visualize.

Page Top

Professional golfers comment

小田 孔明 プロ

Koumei Oda

These clubs feel really good to hit with, and even as a pro I judge them to be good. With the three number and four, you can hit the ball high and aim for the green, so I think amateur golfers should consider using these too.

上井 邦裕 プロ

Kunihiro Kamii

The ball is easy to lift and gets good distance. I get good swing-through and can hit the ball with strength. These clubs get frequent use for tee shots on tight holes. The are reliable equipment for demanding tournament settings.

Page Top


TW−U グリップ


Name TWRubber
Material Rubber
Gross weight (g) 47.5
Size M62

Page Top


Head material / manufacturing process MS225 / casting
Face material / manufacturing process Maraging stainless steel / rolled
Plating Double-layer plating / Satin finish
Shaft NS PRO950GH
# (No.) #2 #3 #4
Loft(deg.) 18 21 24
Lie angle(deg.) 59.0 59.5 60.0
Length(inches) NS PRO950GH 39.25 38.75 38.25
Distance to center of gravity(mm) 35.0 35.0 35.0
Height to center of gravity(mm) 19.0 19.0 19.0
Depth to center of gravity(mm) 6.0 6.0 6.0
Gravity angle(deg.) 12.0 12.5 13.0
Swing weight・
Gross weight(g)
NS PRO950GH D3 392 D3 398 D3 403
Made in Japan

Page Top



Material Steel
Kick-point Mid
Butt diameter (mm) 15.5
Tip diameter (mm) 9.02
Flex S
# (No.) #2 #3 #4
Gross weight (g) S 98.0 98.0 98.0
Torque (deg.) S 2.00 2.00 2.00
Data is a maker official announcement value

Page Top



Page Top