BERESKIWAMI2 4S LADIESIRON

This model was available
only in limited regions.
BERES KIWAMI2 4S LADIES IRON

Page Top

TECHNOLOGY

The body is made of 17-4 stainless steel with higher strength and its weight is made lighter by marginal thickness design, succeeding in having a structure in which two tungsten weights can be attached. The design with the weight distributed to the toe and heel increases the moment of inertia, reducing variation in distance even missed hits.

The face is made of ES230, a high-strength plate material. The design provides high trajectories and maximum carry distance.

The receiving frame part is sharpened to the maximum width for the effective use of the large-sized face repulsion area. This will achieve wider sweet spot and higher repulsion.

Page Top

SPEC

Head material/Manufacturing process SUS630 / Casting
Head Finish Satin Finish / 2-layer Plated + Painted Finish
Shaft BERES KIWAMI Ⅱ
Flex L
# (No.) 5 6 7 8 9 10 11 SW
Loft (deg.) 24.0 27.0 30.0 34.0 38.0 43.0 49.0 56.0
Length (inches) 37.0 36.5 36.0 35.5 35.0 34.5 34.0 34.0
Lie angle (deg.) 61.0 61.5 62.0 62.5 63.0 63.0 63.0 63.5
Face progression (mm) 2.25 2.75 3.25 3.25 3.25 3.75 3.75 4.75
Distance to Center of Gravity (mm) 39.0 39.0 39.0 39.0 38.5 37.5 36.5 35.5
Height to Center of Gravity (mm) 21.0 21.0 22.0 22.0 23.0 23.0 23.5 23.5
Depth to Center of Gravity (mm) 5.0 5.0 5.0 5.0 4.5 3.5 3.0 3.0
Gravity Angle (deg.) 13.0 - - - - - - -
Swing weight L C0 C1
Gross weight (g) L 318 323 329 335 341 347 354 356
Made in Japan
This model was available only in limited regions.

Page Top

SHAFT

Shafts that Dedicated to KIWAMI II

This dedicated shaft was newly developed for KIWAMI at Sakata Factory over a number of years.
It was designed so that the entire shaft creates a natural deflection and makes the most of the entire deflection when drives a ball. Even a slow swing accelerates the head powerfully for a long carry. Its higher rigidity at the distal end ensures a stable directional property.

Material Carbon
Kick-point Low
Butt diameter (mm) 14.6
Tip diameter (mm) 9.5
Flex L
# (No.) 5 6 7 8 9 10 11 SW
Gross weight (g) L 41.0 40.4 39.8 39.2 38.6 38.0 37.4 37.4
Torque (deg.) L 4.03 3.96 3.89 3.82 3.75 3.68 3.61 3.61
Frequency (cpm) L 237 245 253 261 269 277 285 285
Data refers to the 4S grade/shaft only The torque and vibration frequency were measured with no head mounted

Page Top

HONMA SHOPS

Detail

Page Top