AMAZING SPEC IRON II

AMAZING SPEC IRON II The long distance is indeed amazing

TECHNOLOGY

The length, the light weight, the super loft.
The titanium face iron delivers amazing distance comfortably.



Face using 6-4 titanium, to make the head lighter. The rest of the weight was distributed on the remaining outer peripheral portion of the head, so that expands the size of the head and also sweet spot.
Height difference between toe and heel gives you the feeling of wrapped up the ball.

Sole width is 1.5mm wider compared to the previous model. The low and deep center of gravity makes the ball rises easily in the super loft, achieving a further distance. The widened sole can make the swing as easily as wood, it also contributes to reduce miss shots.

The top edge of the clubface is used original "Honma cut."Eliminating the pressure caused by super loft, relaxing while aim for the ball.
Honma cutting is refers to that making the edgy corners of the upper end of the face round.

The shaft in design bends softly on the whole, making the balls well caught, and easier to avoid slicing.

Page Top

SPEC

Head material / Manufacturing process SUS630 / Casting + Titanium (face)
Head plating Satin Finish + Gloss Paint Finish
Shaft AMAZING SPEC ARMRQ6 49 3S
# (No.) 5 6 7 8 9 10 11 AW SW
Loft (deg.) 21.5 23.5 27.0 30.0 34.0 39.0 44.0 49.0 55.0
Length (inches) 38.5 38.25 38.0 37.5 37.0 36.5 36.0 35.75 35.5
Lie angle (deg.) 61.0 61.5 61.5 62.0 62.0 62.5 63.0 63.0 63.5
Face progression(mm) 2.25 2.75 2.75 3.25 3.25 3.75 4.25 4.75 4.75
Distance to center of gravity (mm) 37.0 37.0 37.0 36.5 36.0 35.5 35.0 35.0 35.0
Height to Center of Gravity (mm) 18.0 18.0 19.0 19.0 20.0 20.0 20.5 21.0 22.0
Depth to center of gravity (mm) 6.5 6.0 6.0 5.5 5.5 5.0 5.0 4.0 3.5
Gravity Angle (deg.) 13.0 13.0 14.5 14.5 15.5 17.0 17.5 19.5 21.0
AMAZING SPEC
ARMRQ6 49 3S
Swing weight R C8 C9 D0
Gross weight (g) R 339 342 347 353 360 367 373 378 381
Made in Japan

Page Top

SHAFT

AMAZING SPEC ARMRQ6 49 3S

Material Carbon+six-axisUD
Kick-point Low
Butt diameter (mm) 15.4
Tip diameter (mm) 9.8
Flex R
# (No.) 5 6 7 8 9 10 11 AW SW
Gross weight (g) R 57.0 56.5 57.5 57.0 57.5 57.0 56.5 56.0 55.5
Torque (deg.) R 3.08 3.01 2.94 2.87 2.80 2.73 2.66 2.66 2.66
Frequency (cpm) R 264 272 280 288 296 304 312 312 312
Data refers to the 3S grade/shaft only

Page Top

HONMA SHOPS

Detail

Page Top