TOUR WORLDTW727FAIRWAY WOOD

TOUR WORLD TW727 FW:Selectively volumized cup face emphasizes distance. TOUR WORLD TW727 × VIZARD

TECHNOLOGY

TW727 FW

Features

This is a model with a lot of request from professionals reflected back which we believe the best in our history and highly valued by Koumei Oda, a professional golfer.

By adopting professional golfers opinion, we made more clear difference between 13 degrees and 15 degrees #3W.

The relatively large head focuses on easy-to-address performance and easy operability. A face set up thinner than the former ones results in a large face, providing a higher bouncing force.

Widened the width of the scoreline to allow the face side more visible at address.
Straight scoreline is easy to aim at a target.
3W/13°
Deep CG design for higher trajectory
3W/15°
Shallow CG design for strong trajectory

The 13° deep center-of -gravity design easily realizes high trajectories, and 15° and #5 and #7 is a shallow center-of-gravity design that focuses on strong trajectories depending on their respective roles.

13°:Large head ・deep center of gravity ・high center of gravity position providing tee shot feeling
15°:Large head ・same center of gravity position with more shallow center of gravity
The cup face mechanism with partially different thickness increases the bouncing force
Straight-Line section of leading edge

Comparison with previous model

Large head size than the former model gives more comfort at address, and by setting face wall thickness thinner able to enlarge repulsion.

Page Top

SPEC TW727

Head material/manufacturing process SUS630/casting
Face material/manufacturing process High-strength custom steel/forged
SHAFT VIZARD
YA75,YA65,YA55,YC75,YC65,YC55,YZ75,YZ65,YZ55
ARMRQ8 62,ARMRQ8 54
# (No.) #3/13° #3/15° #5/18° #7/21°
Loft (deg.) 13 15 18 21
Head volume(cm3 173 173 157 147
Length (inches) 42.75 42.75 42.25 41.75
Lie angle (deg.) 58.0 58.0 58.5 59.0
Distance to center of gravity (mm) 34.0 33.5 33.0 32.5
Height to center of gravity (mm) 23.5 23.0 22.5 22.5
Depth to center of gravity (mm) 32.5 27.5 27.5 27.5
Gravity angle (deg.) 23.0 18.0 16.5 15.0
Swing weight・
Gross weight (g)
VIZARD YA75 S D2・339 D2・339 D2・343 D2・347
VIZARD YA65 SR D2・333 D2・333 D2・337 D2・341
S D2・334 D2・334 D2・338 D2・342
VIZARD YA55 R D1・324 D1・324 D1・328 D1・332
SR D2・327 D2・327 D2・331 D2・335
S D2・328 D2・328 D2・332 D2・336
VIZARD YC75 S D2・339 D2・339 D2・343 D2・347
VIZARD YC65 SR D2・333 D2・333 D2・337 D2・341
S D2・334 D2・334 D2・338 D2・342
VIZARD YC55 R D1・323 D1・323 D1・327 D1・331
SR D2・326 D2・326 D2・330 D2・334
S D2・327 D2・327 D2・331 D2・335
VIZARD YZ75 S D2・340 D2・340 D2・344 D2・348
VIZARD YZ65 SR D2・333 D2・333 D2・337 D2・341
S D2・334 D2・334 D2・338 D2・342
VIZARD YZ55 R D1・325 D1・325 D1・329 D1・333
SR D2・328 D2・328 D2・332 D2・336
S D2・329 D2・329 D2・333 D2・337
ARMRQ8 62 R D0・329 D0・329 D0・333 D0・337
S D1・333 D1・333 D1・337 D1・341
ARMRQ8 54 R D0・322 D0・322 D0・326 D0・330
S D1・326 D1・326 D1・330 D1・334
Made in Japan

GRADE

3S 4S 5S
Please check difference of shaft grade

Page Top

SHAFT TW727

Please click here for details of shaft.
  • YA
  • YC
  • TZ
  • ARMRQ8

VIZARD YA75

Material Carbon + YARN
Kick-point Mid
Butt diameter (mm) 15.7
Tip diameter (mm) 8.6
Flex S
# (No.) 3W 5W 7W
Gross weight (g) S 71.5 70.5 69.5
Torque (deg.) S 3.05 3.05 3.05
Frequency (cpm) S 314 321 328
Data refers to the shaft only

VIZARD YA65

Material Carbon + YARN
Kick-point Mid
Butt diameter (mm) 15.6
Tip diameter (mm) 8.6
Flex SR,S
# (No.) 3W 5W 7W
Gross weight (g) SR 62.5 61.5 60.5
S 64.0 63.0 62.0
Torque (deg.) SR 3.5 3.5 3.5
S 3.45 3.45 3.45
Frequency (cpm) SR 303 310 317
S 311 318 325
Data refers to the shaft only

VIZARD YA55

Material Carbon + YARN
Kick-point Mid
Butt diameter (mm) R 15.4
SR 15.5
S 15.5
Tip diameter (mm) 8.6
Flex R,SR,S
# (No.) 3W 5W 7W
Gross weight (g) R 54.0 53.0 52.0
SR 55.5 54.5 53.5
S 57.0 56.0 55.0
Torque (deg.) R 3.95 3.95 3.95
SR 3.90 3.90 3.90
S 3.85 3.85 3.85
Frequency (cpm) R 281 288 295
SR 289 296 303
S 297 304 311
Data refers to the shaft only

VIZARD YC75

Material Carbon + YARN
Kick-point Mid
Butt diameter (mm) 15.7
Tip diameter (mm) 8.6
Flex S
# (No.) 3W 5W 7W
Gross weight (g) S 71.5 70.5 69.5
Torque (deg.) S 3.05 3.05 3.05
Frequency (cpm) S 305 312 319
Data refers to the shaft only

VIZARD YC65

Material Carbon + YARN
Kick-point Mid
Butt diameter (mm) 15.6
Tip diameter (mm) 8.6
Flex SR,S
# (No.) 3W 5W 7W
Gross weight (g) SR 62.5 61.5 60.5
S 64.0 63.0 62.0
Torque (deg.) SR 3.5 3.5 3.5
S 3.45 3.45 3.45
Frequency (cpm) SR 294 301 308
S 302 309 316
Data refers to the shaft only

VIZARD YC55

Material Carbon + YARN
Kick-point Mid
Butt diameter (mm) R 15.4
SR 15.5
S 15.5
Tip diameter (mm) 8.6
Flex R,SR,S
# (No.) 3W 5W 7W
Gross weight (g) R 53.0 52.0 51.0
SR 54.5 53.5 52.5
S 56.0 55.0 54.0
Torque (deg.) R 3.95 3.95 3.95
SR 3.90 3.90 3.90
S 3.85 3.85 3.85
Frequency (cpm) R 272 279 286
SR 280 287 294
S 288 295 302
Data refers to the shaft only

VIZARD YZ75

Material Carbon + YARN
Kick-point High
Butt diameter (mm) 15.6
Tip diameter (mm) 8.6
Flex S
# (No.) 3W 5W 7W
Gross weight (g) S 73.5 72.5 71.5
Torque (deg.) S 3.0 3.0 3.0
Frequency (cpm) S 308 315 322
Data refers to the shaft only

VIZARD YZ65

Material Carbon + YARN
Kick-point High
Butt diameter (mm) 15.6
Tip diameter (mm) 8.6
Flex SR,S
# (No.) 3W 5W 7W
Gross weight (g) SR 63.5 62.5 61.5
S 65.0 64.0 63.0
Torque (deg.) SR 3.45 3.45 3.45
S 3.40 3.40 3.40
Frequency (cpm) SR 294 301 308
S 302 309 316
Data refers to the shaft only

VIZARD YZ55

Material Carbon + YARN
Kick-point High
Butt diameter (mm) R 15.5
SR 15.6
S 15.6
Tip diameter (mm) 8.6
Flex R,SR,S
# (No.) 3W 5W 7W
Gross weight (g) R 56.0 55.0 54.0
SR 57.5 56.5 55.5
S 59.0 58.0 57.0
Torque (deg.) R 3.90 3.90 3.90
SR 3.85 3.85 3.85
S 3.80 3.80 3.80
Frequency (cpm) R 277 284 291
SR 285 292 299
S 293 300 307
Data refers to the shaft only

ARMRQ8 62

Material Carbon+eight-axisUD
Kick-point Mid
Butt diameter (mm) R 15.5
S 15.5
Tip diameter (mm) 8.6
Flex R,S
# (No.) 3W 5W 7W
Gross weight (g) R 62.5 62.0 61.5
S 65.5 65.0 64.0
Torque (deg.) R 3.35 3.35 3.35
S 3.25 3.25 3.25
Frequency (cpm) R 293 298 303
S 309 314 319
Data refers to the 2S grade/shaft only

ARMRQ8 54

Material Carbon+eight-axisUD
Kick-point Mid
Butt diameter (mm) R 15.5
S 15.5
Tip diameter (mm) 8.6
Flex R,S
# (No.) 3W 5W 7W
Gross weight (g) R 54.5 54.0 53.5
S 57.5 57.0 56.5
Torque (deg.) R 3.60 3.60 3.60
S 3.50 3.50 3.50
Frequency (cpm) R 275 280 285
S 291 296 301
Data refers to the 2S grade/shaft only

Page Top

GRIP

Name TWRubber M60 White
Material Rubber
Gross weight (g) 49.5
Size M60

Page Top

HONMA SHOPS

Detail

Page Top