BERESKIWAMI2 4S LADIESFAIRWAY WOOD

This model was available
only in limited regions.
BERES KIWAMI2 4S LADIES FAIRWAY WOOD

Page Top

TECHNOLOGY

Deep and low center of gravity design.

Ball can be raised easily. The blur of the butt when hitting the ball can be suppressed to a minimum. On top of that, by shortening the center of gravity distance, hitting a slice trajectory can easily be avoided.

Page Top

SPEC

Head material/Manufacturing process SUS630 / Casting
Face material/Manufacturing process High-strength custom steel / Rolling
Shaft BERES KIWAMI Ⅱ
Flex L
# (No.) 3W 5W
Loft (deg.) 16 19
Head volume (cm3) 168 160
Length (inches) 41.5 41.0
Lie angle (deg.) 60.5 61.0
Distance to Center of Gravity (mm) 30.0 30.0
Height to Center of Gravity (mm) 23.5 24.0
Depth to Center of Gravity (mm) 32.0 32.0
Gravity Angle (deg.) 22.0 22.0
Swing weight L B8 B8
Gross weight (g) L 270 274
Made in Japan
This model was available only in limited regions.

Page Top

SHAFT

Shafts that Dedicated to KIWAMI II

This dedicated shaft was newly developed for KIWAMI at Sakata Factory over a number of years.
It was designed so that the entire shaft creates a natural deflection and makes the most of the entire deflection when drives a ball. Even a slow swing accelerates the head powerfully for a long carry. Its higher rigidity at the distal end ensures a stable directional property.

Material Carbon
Kick-point Low
Butt diameter (mm) 15.2
Tip diameter (mm) 8.6
Flex L
# (No.) 3W 5W
Gross weight (g) L 38.0 37.5
Torque (deg.) L 5.65 5.65
Frequency (cpm) L 208 212
Data refers to the 4S grade/shaft only The torque and vibration frequency were measured with no head mounted

Page Top

HONMA SHOPS

Detail

Page Top