ARMRQ X シャフト

  • Technology
  • Lineup
  • Grade

TECHNOLOGY

  • The shaft is 1g lighter than the previous model with the same frequency
  • Joint development with Nissei optimized performance and shaft flex with “10 axis PP”
  • The same as the previous model, easy to control the ball with improved launch angles; the stiffness of the center shaft is optimized for players of all levels
  • TORAYCA®T1100G is multi-layered, making it easy to swing with increased tempo

トレカ

This new carbon fiber, developed through technical innovations by Toray for next-generation aerospace applications, brings together two contradictory characteristics: ultra-high strength and high elasticity.

More Power. More Forgiveness. Less Weight.
HONMA's first 10-axis shaft.

ARMRQ Iron Shaft with Weight Flow (WF) design

This shaft allows golfers to increase trajectory with their long irons, while optimizing their ball striking consistency with their short irons. Feel and performance remains consistent throughout iron set. Weight Flow design adapts to all irons, creating consistent feel in the long, middle and short irons.

A set of 6-thru-11-iron has a weight-flow that increases 3g on every other iron.

ARMRQ-X47R #6・#7:49g ▶ #8・#9:52g ▶ #10・#11:55g ※4-and-5-iron are the same weight as 6-and-7-iron. AW and SW are the same weight as the 10- and 11-iron.

ARMRQ∞ 3S/4S/5S grade

For more than 3S grade shaft, TORAYCA®Prepreg is equipped that excels in vibration control function Also, two kind of shafts are available, enabling the users to select kick point depending on his/her swing.

Effect of TORAYCA®Prepreg

・Suppressing the power loss enables much stronger trajectory

・Reducing the shock of impact decreases the loss of power transmission

・Reducing the vibration of head delivers the stable direction

Page Top

LINEUP

Please choose appropriate your swing speed.

ARMRQ X 60Head Speed 46-(m/s)

DRIVER
Material Carbon + ten-axisUD
Kick-point High-mid
Flex R SR S SX X
Butt diameter(mm) 15.5 15.5 15.6 15.6 15.7
Tip diameter(mm) 8.6
Gross weight(g) 60.5 62.0 63.5 65.0 66.5
Torque(deg.) 4.20 4.15 4.10 4.05 4.00
Frequency(cpm) 269 277 285 293 301
Data refers to the 2S/1W
IRON
Material Carbon + ten-axisUD
Kick-point High-mid
Flex R SR S SX X
Butt diameter(mm) 15.8 15.8 15.9 15.9 16.0
Tip diameter(mm) 9.3
Gross weight(g) 61.0 62.5 64.0 65.5 67.0
Torque(deg.) 2.94 2.89 2.84 2.79 2.74
Frequency(cpm) 330 338 346 354 362
Data refers to the 2S/#7

Equipped model S-06 IS-06 U-06
※Available for order

ARMRQ X 52Head Speed 42-46(m/s)

DRIVER
Material Carbon + ten-axisUD
Kick-point Mid
Flex R SR S
Butt diameter(mm) 15.4 15.4 15.5
Tip diameter(mm) 8.6
Gross weight(g) 52.5 54.0 55.5
Torque(deg.) 4.30 4.25 4.20
Frequency(cpm) 250 258 266
Data refers to the 2S/1W
IRON
Material Carbon + ten-axisUD
Kick-point Mid
Flex R SR S
Butt diameter(mm) 15.3 15.3 15.4
Tip diameter(mm) 9.3
Gross weight(g) 52.5 54.0 55.5
Torque(deg.) 3.04 2.99 2.94
Frequency(cpm) 284 292 300
Data refers to the 2S/#7

Equipped model S-06 IS-06 U-06

ARMRQ X 47Head Speed 38-42(m/s)

DRIVER
Material Carbon + ten-axisUD
Kick-point Low-mid
Flex R SR S
Butt diameter(mm) 15.3 15.3 15.4
Tip diameter(mm) 8.6
Gross weight(g) 47.5 49.0 50.5
Torque(deg.) 4.80 4.75 4.70
Frequency(cpm) 236 244 252
Data refers to the 2S/1W
IRON
Material Carbon + ten-axisUD
Kick-point Low-mid
Flex R SR S
Butt diameter(mm) 15.2 15.2 15.3
Tip diameter(mm) 9.3
Gross weight(g) 48.0 49.5 51.0
Torque(deg.) 3.24 3.19 3.14
Frequency(cpm) 277 285 293
Data refers to the 2S/#7

Equipped model S-06 IS-06 U-06

ARMRQ X 43Head Speed 34-38(m/s)

DRIVER
Material Carbon + ten-axisUD
Kick-point Low
Flex R S
Butt diameter(mm) 15.1 15.2
Tip diameter(mm) 8.6
Gross weight(g) 43.5 45.0
Torque(deg.) 5.90 5.85
Frequency(cpm) 205 213
Data refers to the 2S/1W
IRON
Material Carbon + ten-axisUD
Kick-point Low
Flex R S
Butt diameter(mm) 14.4 14.5
Tip diameter(mm) 9.3
Gross weight(g) 44.5 46.0
Torque(deg.) 3.68 3.63
Frequency(cpm) 263 271
Data refers to the 2S/#7

Equipped model S-06 IS-06 E-06 IE-06 U-06

ARMRQ X 38Head Speed -34(m/s)

DRIVER
Material Carbon + ten-axisUD
Kick-point Low
Flex L A
Butt diameter(mm) 15.1 15.2
Tip diameter(mm) 8.6
Gross weight(g) 38.5 40.0
Torque(deg.) 6.25 6.20
Frequency(cpm) 200 207
Data refers to the 2S/1W
IRON
Material Carbon + ten-axisUD
Kick-point Low
Flex L A
Butt diameter(mm) 14.2 14.2
Tip diameter(mm) 9.3
Gross weight(g) 39.5 41.0
Torque(deg.) 3.85 3.80
Frequency(cpm) 249 256
Data refers to the 2S/#7

Equipped model E-06 Ladies IE-06 Ladies U-06 Ladies

Page Top

GRADE

Illustration of expected trajectory (by shaft grade)

SHAFTの違いによる弾道イメージ

Shaft Grade Data (testing by Honma)

Elasticity of tensile

Shaft Grade 2S 3S 4S 5S
Elasticity of tensile Elasticity of tensile

Static Measurement

Note: Testing yields theoretical figures for side wobble at a distance of 200meters based on 5S grade. A weight of 1kg is added to the toe while keeping the shaft fixed. The discrepancies in the figures are smaller than for dynamic testing due to the side spin factor.

Shaft Grade 2S 3S 4S 5S
Side Wobble 4m 2m 1m 0m

Dynamic Testing

Note: Data on strokes (made by robots) is collected by the hit analyzer equipment.

Shaft Grade 2S 3S 4S 5S
Off-center Toward Heel 6.46m 5.40m 3.32m 0m
Off-center Toward Toe 3.88m 2.70m 0.92m  0m

Shaft Attributes

Shaft Grade 2S 3S 4S 5S
  Shaft Attributes

Page Top

HONMA SHOPS

Detail